

zł548.53 tax excl.
Set with Adafruit HUZZAH32 (ESP32) board and expansion module with 8 BME688 sensors (gas, pressure, temperature and humidity sensor). Bosch BME688 Gas Sensor Developer Kit
Development kit with Adafruit HUZZAH32 board and expansion module with 8 BME688 sensors. It is pre-programmed and ready to use. Makes it easy to start and learn to use BME688 chips.
Adafruit HUZZAH32 is a development board with a built-in ESP32 WiFi module. The heart of the board is a microcontroller module clocked at 240 MHz and logic operating in the voltage range from 0 to 3.3 V. Programming the board is extremely simple thanks to the use of the Arduino IDE environment that ensures a quick start of projects related to IoT technology.
The BME688 is an integrated gas, pressure, temperature and humidity sensor housed in one MEMS housing. The chip has been specially developed for mobile applications and wearables where size and low power consumption are key requirements. The gas sensor on the BME688 can detect a wide range of air quality gases, including volatile organic compounds (VOCs) from paints (such as formaldehyde), varnishes, paint strippers, cleaners, furniture, office equipment, adhesives and alcohol.
The set includes a microSD card with configuration files and a dedicated CR1220 battery as a power supply that maintains the RTC clock.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. Adafruit 3405
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591
No product available!
Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, the module has a built-in system for charging Li-Pol batteries. The plate has soldered goldpin connectors (female extension). Adafruit 3619
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430
M5Stack series kit equipped with ESP32 and camera with OV3660 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121-B-V11
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
Development board equipped with ESP32-S3-WROOM-1 module. It is an interesting alternative to Arduino Uno boards. It has a compatible shape and pin layout, while making available the large resources offered by the ESP32 microcontroller. It can be programmed with Arduino, ESP-IDF, MicroPython and CircuitPython. SB Components 26647
KAmod ESP32 ETH+POE is a board equipped with the ESP32-WROOM module, enabling communication via Wi-Fi 2.4 GHz and Ethernet with a typical RJ45 connector, integrated with a USB-UART converter and a PoE power supply system compliant with IEEE 802.3af/at. The design of the board with dimensions of 85x56 mm resembles the Raspberry Pi family, and on the 40-pin connector there are all important I/O ports and supply voltages of 5 V and 3.3 V for powering additional components
A set for testing ambient temperature and humidity as well as air quality. It is a combination of the M5Stack Basic host module, the SHT30 temperature and humidity sensor and the PMSA003 digital universal particle concentration sensor. M5Stack K023-b
Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
The ESP32-S3FH4R2 development board is based on the Xtensa 32-bit LX7 dual-core processor. It offers comprehensive wireless connectivity, including 2.4GHz Wi-Fi and Bluetooth LE. Equipped with 512 KB SRAM, 384 KB ROM, 2 MB PSRAM and 4 MB Flash memory, as well as a rich set of peripheral interfaces, the board is ideal for advanced technology projects and supports popular development environments such as ESP-IDF, MicroPython and Arduino IDE. Waveshare ESP32-S3-Tiny
ESP32-S3-POE-ETH-CAM-KIT enables rapid implementation of projects in smart monitoring, wired and wireless communication, and edge systems. Complete functionality with camera support and PoE power makes it a versatile solution for professional IoT applications.
ESP32-S3-LCD-1.47 is a versatile development board equipped with a color display, support for Wi-Fi, Bluetooth, and 16 MB of Flash memory. Thanks to its rich hardware resources and compatibility with development libraries, it provides a solid platform for creating modern HMI interfaces, IoT devices, and interactive applications.
No product available!
Advanced development board equipped with a 2.8-inch 240x320 pixel LCD display and 5-point touch control, making it ideal for IoT and HMI applications. With a dual-core 240MHz ESP32-S3 processor, 16MB Flash and 8MB PSRAM, the board supports advanced applications and real-time interactions. Additionally, built-in Wi-Fi, Bluetooth 5.0, a 6-axis sensor, a micro SD slot and battery power make the device versatile and ideal for mobile projects. Waveshare ESP32-S3-Touch-LCD-2.8
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U
ESP32-S3-Korvo-2 is an advanced AIoT development board with powerful AI acceleration and robust security features, ideal for smart homes and industrial automation. The board supports Wi-Fi and Bluetooth 5 (LE), enabling a wide range of wireless connections.
Energy-efficient development board with a 32-bit RISC-V 160 MHz processor, designed for smart IoT and home automation applications. It supports modern communication protocols such as Wi-Fi 6, Bluetooth 5, Zigbee 3.0, Thread 1.3 and Matter, which allows easy integration with smart home systems. Thanks to compatibility with Arduino IDE, MicroPython and Gravity and Fermion sensors, the board offers great flexibility and ease of implementation in various projects. DFRobot DFR1075
Set with Adafruit HUZZAH32 (ESP32) board and expansion module with 8 BME688 sensors (gas, pressure, temperature and humidity sensor). Bosch BME688 Gas Sensor Developer Kit