ESP32-S3-DevKitC-1-N8R2 - WiFi + Bluetooth development board

Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi, BLE and LoRa communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993070

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter. Totem TE-X4-KIT2

Board with WiFi and BLE Espressif ESP32-S3 module and OV2640 camera and digital microphone. It offers 8 MB Flash memory and 8 MB SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991115

Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero-M

Adapter for ESP8266 modules dedicated to control addressable RGB LEDs from the WS2812 series

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907

Advanced module with a 32-bit, single-core RISC-V processor. It has a built-in Bluetooth LE 5 and IEEE 802.15.4 (Thread, Zigbee 3.0) module. Perfect solution for IoT (Internet of Things) projects. Version with connectors for selfassembly. Waveshare ESP32-H2-DEV-KIT-N4

Development board with Espressif ESP32-S3R8 WiFi and Bluetooth LE module equipped with a dual-core Xtensa 32-bit LX7 processor. It offers 16 MB Flash memory and 8 MB PSRAM. The pins available on the board are compatible with Arduino Nano ESP32. Waveshare ESP32-S3-Nano

Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979

Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M

Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377

Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985

M5Stack series kit equipped with ESP32 and camera with OV2640 sensor. It has a built-in W5500 chip and can be powered by the RJ45 (PoE) connector. M5Stack U121

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. With DC adapter and Li-Ion battery. Totem TE-X4-KIT3