D1 Mini V2 WIFI ESP8266 board
ID: 573897
5906623456659
zł19.50
Tax included
zł15.85 tax excl.
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The development board allows you to integrate Wi-Fi module (ESP8266), known for its simplicity of use and considerable capabilities in projects requiring network access, eg within IoT. The module has 11 digital I / O pins with interrupt, PWM, I2C and 1-Wire. There is also one analog input (input 3.2 V max). The module is programmed through the Micro USB connector. The board is compatible with Arduino , MicroPython and NodeMCU .
Attention!
The maximum allowed voltage on the lines of the ESP8266 system is 3.3 V. Make sure that the additional module attached to the board does not force the lines of the ESP8266 voltage higher than allowed.
properties
- ESP8266MOD system
- The frequency of the 80 MHz / 160 MHz clock
- Flash memory 4 MB bytes
- Operating voltage 3.3 V
- 11 digital I / O pins
- MicroUSB socket
- Reset button
- Pins of analog input 1 (max. Input: 3.2 V)
- Converter UART <> USB - CH340G
- Dimensions: 34.2 x 25.6 mm
- Weight: 10 g
573897
Data sheet
- Logic voltage
- 3,3 V
- Wi-Fi chip
- ESP8266
- Wi-Fi standard
- 802.11 b/g/n
- Frequency range
- 2,4 GHz
- Baud rate
- 72,2 Mbps
- Antenna connector
- Brak
- Power supply voltage
- 5 V
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
WiFi module based on ESP8266. The module has a built-in antenna and USB-UART converter. The module can be programmed in Lua (under the control of the NodeMCU firmware) or in the Arduino environment. 10 GPIO lines are available which each can be configured to work as PWM, I2C.
zł19.90 24hAvailable quantity: 32 AvailableDevelopment board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
zł25.40 24hAvailable quantity: 8 AvailableBMP180 temperature / pressure sensor module compatible with WeMos D1 mini board.
zł5.74 24hAvailable quantity: 6 AvailableModule with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.78 Delivery date unknown No product available!
Relay module for the WeMos D1 Mini WiFi set
zł4.78 24hAvailable quantity: 7 AvailableRTC DS1307 real-time clock module and MicroSD card slot for the WeMos D1 Mini.
zł11.66 Delivery date unknown No product available!
Other products in the same category (16)
Development board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186
zł89.40 24hAvailable quantity: 2 AvailableWifi module with ESPR8266 ESPRESSIF for communication in the 2.4 GHz band. It is powered by a voltage from 3 V to 3.6 V, available in an SMD enclosure. ESP-WROOM-02
zł15.66 24hAvailable quantity: 6 AvailableDevelopment board with ESP8266 microcontroller with built-in Wi-Fi communication. The system is clocked at 80 MHz and powered by 3.3 V. It includes a Tensillica core and a full Wi-Fi stack. Adafruit 3046
zł111.73 24hAvailable quantity: 3 AvailableESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082
zł87.55 4 weeks No product available!
Development board ESP8266 with WiFi module; WRL-13231
zł127.80 24hAvailable quantity: 5 AvailableWi-Fi module based on the ESP8266 system - simplicity of use (communication through UART, supports AT commands), 3.3V power supply, support for WPA / WPA2 encryption - these features make the EPS8266 module applicable anywhere, where reliable and effective data transmission. The module is not equipped with an antenna, it should be attached using the U.FL connector. ESP-05
zł16.06 24hAvailable quantity: 23 AvailableDevelopment board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
zł25.40 24hAvailable quantity: 8 AvailableESP-PROG is an advanced tool for programming and debugging Espressif microcontrollers such as ESP32, ESP32-C3, ESP32-S2, ESP32-S3 and ESP8266. With the built-in FT2232HL USB bridge, ESP-PROG converts the USB 2.0 interface to serial and parallel interfaces, offering functions of automatic firmware download, serial communication and online debugging via JTAG
zł79.90 24hAvailable quantity: 15 AvailableDevelopment board with the ESP-WROOM-02 WiFi module. The board has a USB-UART converter, a basket for a Li-Ion 18650 battery and a charging circuit
zł30.20 6 weeks No product available!
WiFi 802.11 b/g/n module with ESP8266 system, 16 terminals are available with a 2 mm pitch with the possibility of soldering gold pins, there are 9 GPIO lines and 1 ADC line on the connector. Built-in ceramic antenna and U.FL antenna connector. ESP-07
zł11.50 24hAvailable quantity: 42 AvailableBMP180 temperature / pressure sensor module compatible with WeMos D1 mini board.
zł5.74 24hAvailable quantity: 6 AvailableDevelopment board D1 Mini Pro with WiFi ESP8266 module and 16 MB Flash memory, equipped with ceramic antenna and external antenna connector. The module can be programmed from the Arduino IDE level. WeMos D1 Mini Pro
zł25.44 24hAvailable quantity: 6 AvailableEvaluation set designed for the use of Internet of Things based on ArduCAM-Mini-2MP and ArduCAM-ESP8266-Nano-V2 modules. ArduCAM-Mini-2MP is a module with a 2 megapixel camera with an OV2640 transducer and an ESP8266 chip. Mounting the M12 lens. ArduCAM B0085
zł234.47 24hAvailable quantity: 1 AvailableThe module is based on the ESP8266MOD chip. Thanks to the support of the 802.11 b/g/n standard, it enables wireless communication with WiFi networks, which allows for Internet access and data exchange. WeMos D1 Mini Type-C
zł15.62 24hAvailable quantity: 17 AvailableWiFi module with ESP8266 and 1.14" display, designed to work with Raspberry Pi Pico. It communicates via UART interface using AT commands. SB Components 21888
zł75.50 24hAvailable quantity: 2 AvailableWiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.
zł74.81 24hAvailable quantity: 5 Available
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini