ESP-PROG - debugger and programmer

M5Stack series development kit equipped with ESP32-C3. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K122

Espressif ESP32-C3 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M

The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit

Board with WiFi and Bluetooth Espressif ESP32-C3 module. It offers 4MB Flash and 400KB SRAM and a LiPo charging circuit. The set includes an expansion board with a display connector. DFRobot DFR0868

Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 512 kB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Version with soldered connectors. Waveshare ESP32-C6-Zero-M

A small DIP adapter with a 2.54 mm goldpin connector. Designed for the ESP-01 and ESP-01S modules

M5Stack series development kit equipped with ESP32-PICO-D4. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K051-B

Adafruit HUZZAH32 is a development board with a built-in WiFi ESP32 module. Processor frequency: 240 MHz, Li-Pol battery charging system. The board has soldered goldpin connectors. Adafruit 3591

The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4

Board with the WiFi Espressif ESP32-C3 module. It offers 4 MB of Flash memory and 400 KB of SRAM and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5405

A board with an ESP32 module equipped with a 4.3-inch touch screen. It offers Wi-Fi and Bluetooth 5.0 communication as well as wired communication via RS485, CAN and I2C interfaces. Perfect for developing HMI projects using LVGL libraries. Waveshare ESP32-S3-Touch-LCD-4.3

ESP32 module board equipped with a 1.28-inch round display with touch panel. It offers Wi-Fi and Bluetooth 5.0 communication, has a built-in 6-axis QMI8658 IMU sensor and supports lithium battery charging. Ideal for developing IoT projects, mobile devices and wearable electronics. Version with metal housing. Waveshare ESP32-S3-Touch-LCD-1.28-B

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1

The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"

The ESP32-S3 A7670E 4G development board combines the ESP32-S3R2 microcontroller with the A7670E module, offering global LTE Cat-1, 2G, Wi-Fi, Bluetooth, and GNSS connectivity for advanced IoT applications. With support for lithium batteries and solar panels, as well as a built-in OV2640 camera, the board is ideal for remote monitoring projects, smart homes, and low-power applications.. Waveshare ESP32-S3-A7670E-4G-EN