ESP32-P4 development board with 3.4-inch 800x800 touch display, WiFi and Bluetooth - Waveshare 31523
ID: 1198963
zł307.28
Tax included
zł249.82 tax excl.
ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.
Description
Development board featuring a 3.4-inch round AMOLED display with a resolution of 800×800, based on the ESP32-P4 chip with RISC-V cores, designed for human-machine interaction, environmental monitoring, audio systems, and IoT control applications. The touch panel supports 10-point capacitive touch and is covered with 6H tempered glass using optical bonding technology. It offers a wide 170° viewing angle, high contrast ratio of 1200:1, and brightness of 300 cd/m². The ESP32-C6-MINI module provides Wi-Fi 6 and Bluetooth 5 (LE) support via SDIO interface. Onboard are two microphones with echo cancellation, an ES8311 audio codec, MIPI-CSI camera interface, USB OTG port, TF card slot, speaker connector, and a 40-pin GPIO header partially compatible with Raspberry Pi extensions (adapter required). The device supports AI voice functions, voice platforms, hardware encryption, Secure Boot, and Flash Encryption.
Features
- Display: 3.4″ round AMOLED
- Resolution: 800×800
- Viewing angles: 170°
- Contrast: 1200:1
- Brightness: 300 cd/m²
- Surface: 6H tempered glass, optical bonding
- Processor: ESP32-P4, RISC-V 32-bit (dual-core + single-core)
- Memory: 32 MB PSRAM, 32 MB NOR Flash
- Touch: capacitive, 10-point (GT9271)
- Connectivity: Wi-Fi 6, Bluetooth 5 (LE) – ESP32-C6-MINI (SDIO interface)
- Interfaces: MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO TF, I²C, UART
- Audio: 2× microphones (with EC), ES8311 audio codec, PH 2.0 speaker connector
- GPIO: 40-pin header compatible with selected Raspberry Pi HATs
- Security: Secure Boot, Flash Encryption, TRNG, access protection
- Dimensions: 115.0 × 115.0 mm
- Display area: 87.6 × 87.6 mm
Included in the set
- ESP32-P4-WIFI6-Touch-LCD-3.4C ×1
- 4-pin cable ×2
- Speaker ×1
1198963
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
ESP32-S3-ETH-CAM-KIT is a versatile development tool for creators of intelligent surveillance systems, edge devices, and solutions using artificial intelligence in embedded systems.
zł89.89
24h
Available quantity: 2
Available
A shield designed to collect data from the MyoWare 2.0 Muscle Sensor and transmit it wirelessly using the ESP32-WROOM module. Equipped with a built-in 40 mAh LiPo battery. SparkFun DEV-23387
zł119.81
3 weeks
No product available!
A compact development board that uses the ESP32-PICO-MINI-N8R2 chip with 2 MB PSRAM. It provides wireless communication via Bluetooth, BLE and WiFi. It has a built-in PCB antenna and a Qwiic connector for easy connection of additional modules and sensors. SparkFun DEV-23386
zł55.01
3 weeks
No product available!
Espressif ESP32-C6 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 512 kB SRAM and RGB diode. It has a built-in ceramic WiFi/BLE antenna. Version with soldered connectors. Waveshare ESP32-C6-Zero-M
zł24.96
24h
Available quantity: 13
Available
Module with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18
24h
Available quantity: 3
Available
Espressif ESP32-S3 WiFi and BLE module board. It offers 8 MB of flash memory and 8 MB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991114
zł35.67
24h
Available quantity: 20
Available
Board with WiFi Espressif ESP32-S2 module and 0.96" LCD display. It offers 4 MB Flash memory and 8 MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-LCD-0.96-M
zł70.48
24h
Available quantity: 5
Available
Module with WiFi and BLE Espressif ESP32-S3 system and LCD TFT display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5483
zł155.03
24h
Available quantity: 4
Available
Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700
zł74.24
24h
Available quantity: 2
Available
Set with Adafruit HUZZAH32 (ESP32) board and expansion module with 8 BME688 sensors (gas, pressure, temperature and humidity sensor). Bosch BME688 Gas Sensor Developer Kit
zł674.69
2 weeks
No product available!
Module with WiFi Espressif ESP32-S2. It integrates the TFT LCD display, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5300
zł144.23
24h
Available quantity: 2
Available
Espressif ESP32-S3 WiFi and BLE chip module with 1.14" TFT LCD display. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5691
zł133.89
24h
Available quantity: 3
Available
ESP32-H2-DevKitM-1 is an advanced development board designed for building IoT devices communicating via Zigbee, Thread, Matter, and Bluetooth LE protocols. Thanks to its energy-efficient RISC-V microcontroller, integrated antenna, wide range of peripheral interfaces, and easy access to GPIO pins, the board is an excellent choice for smart home projects, distributed sensors, and battery-powered devices.
zł75.94
24h
Available quantity: 2
Available
Board with the WiFi Espressif ESP32-S2 module. Offers 4MB Flash and 8MB SRAM. Leads are compatible with HAT modules for Raspberry Pi Pico. Waveshare ESP32-S2-Pico-M
zł52.45
24h
Available quantity: 11
Available
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-17381
zł154.62
3 weeks
No product available!
Development board based on the ESP32-S3-WROOM-1-N4 module, equipped with a 240 MHz Xtensa® LX7 processor, offering support for WiFi and Bluetooth 5.0, making it an ideal solution for IoT and AIoT projects. The module supports a wide range of peripheral interfaces and programming methods, such as Arduino IDE, ESP-IDF or MicroPython,. Thanks to the built-in AI acceleration, the board is perfect for applications such as voice recognition, text recognition or sensor data processing. DFRobot DFR1145
zł55.41
24h
Available quantity: 3
Available
ESP32-P4-WIFI6-Touch-LCD-3.4C development board with a 3.4-inch AMOLED display, Wi-Fi 6 and Bluetooth 5 (LE) support, two microphones with echo cancellation, and hardware security features. A solution for AI, HMI, and IoT projects requiring high performance and precise touch interaction.