Relay module for the D1 Mini set

Numato Lab RL20001EN is a 2-channel USB relay module with SPDT relays, 8 GPIO pins, 6 analog inputs and a USB interface, ideal for home automation, industrial, DIY and prototyping applications

Pololu 5424 enables precise switching of loads up to 10 A at voltages up to 30 V, providing galvanic isolation as well as silent and maintenance-free operation thanks to the use of a solid-state relay. Ideal for controlling devices in RC systems, automation, and projects requiring durability and reliability.

A magnetic latching relay that features low power consumption and quiet operation. It allows switching of signals up to 36 V and 10 A. It remains in the last position it was in before power was lost. DFRobot DFR0996

Module with 8 relays with a voltage of 12 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001

Industrial Ethernet module that allows control of 30 relays via RJ45 port. It uses Modbus TCP protocol, PoE (Power over Ethernet) power supply and comes with a rail-mounted housing. Waveshare Modbus POE ETH Relay 30CH

The remotely controlled modulation module MOD-34 / AZ allows wireless load control with up to 10 A current consumption via a relay. It does not contain nRF24l01.

Module with one 240V/2A relay controlled by 5V with a fuse triggered by a high state. modSSR-1CH-H

Module with four 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-4CH-H

This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420

This module allows you to control two SPDT relays and eight digital inputs up to 24V. Powered via USB Type-C, it operates as a CDC device, allowing for simple operation without additional software. The module is ideal for home automation, IoT projects, test systems, and lighting control. Indicator LEDs and a rugged design ensure intuitive control and reliable operation in a variety of applications. Numato Lab NLUSBRC002

Module with 32 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 32ETHRL001-24

Module with SSR relay with a load of up to 3 A. It communicates via the USB interface and does not require additional power supply. Numato Lab SSRP20001-DC

Module with 2 relays 12 V with a maximum switching current of 7 A. Numato Lab RL20002

Extension module compatible with Raspberry Pi. The board is equipped with three 24 V 2 A relays, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM213

The module is equipped with eight 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. The board recommended for use with Arduino enables the control of eight relays using only two microcontroller lines. ICSTATION ICSE014A

Module with 4 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC40001-DC