1 Channel USB Powered Solid State Relay Module - module with SSR AC relay and USB communication

The module contains eight 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors. modRL08_ISO

Module with electromechanical relay. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 3 A or a voltage of 30 V DC and a current of 3 A

The 24 V relay module with adjustable delay time offers a practical solution for AC/DC load control in automation and electronics applications

Module with 2 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY001

Pololu 5425 offers silent, reliable operation when switching currents up to 10 A and voltages up to 30 V, providing galvanic isolation and full configurability of RC control parameters. The version without soldered connectors allows easy adaptation to individual mounting needs in RC and automation projects.

4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178

8-channel PoE module with relays allowing you to connect your PC to other electronic circuits via the network. It does not need a separate cable for power and data transmission. It can be controlled via a simple web interface or Telnet. Numato Lab NLRP1001-A

The module offers 16 TTL-compatible GPIOs, 10 analog channels and individual I/O configuration, making it ideal for automation, DIY projects and advanced system engineering, with the possibility of remote control via standard network interfaces. Numato Lab NLETHGC016-HA

Industrial module with 8 relays. It communicates via RS485 interface and supports Modbus RTU protocol. Waveshare Modbus RTU Relay (EN)

Crowtail-MOSFET 2.0 enables controlling devices powered with up to 50 V DC using a low-voltage signal from a microcontroller. It is used in projects requiring power isolation or switching, such as fans, LED strips or DC motors.

4-channel switch module with a maximum voltage of 16 V and a current of 2 A based on a MOSFET transistor. It is controlled by digital inputs. It is equipped with a screw connection and status LEDs. Adafruit 5757

Module with 32 24 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 32ETHRL001-24

Module Crowtail-SPDT Relay-V2.0 relay module enables controlling devices with high current consumption up to 30 A by means of 5 V logic signals. Intended for automation and control systems, it is used in home and industrial projects.

Module with relay HF152FD 16A. It allows you to control devices with a current consumption of up to 16A using a low-power signal. The module has a relay activation time of about 10ms. DFRobot DFR0251

Module with 2 5 V relays with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL001

Module with 8 digital inputs and 4 relays with a maximum switching current of 2 A. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP8024ADAM