PiCowbell DVI Output - module with mini HDMI connector for Raspberry Pi Pico
ID: 1185638
5906623431717
zł39.54
Tax included
zł32.15 tax excl.
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with a mini HDMI connector dedicated to the Raspberry Pi Pico. It allows you to display images and graphics from the microcontroller directly to an HDMI monitor or TV. It does not support audio streaming. The board has a reset button and a STEMMA QT connector for easy connection of additional sensors. In addition, the I2C pins of the HDMI connector are connected to the I2C interface, which allows you to read the EDID EEPROM of the displays. User also has available CEC, Utility and HotPlug pads. Full documentation is available on the product page.
Features
- Mini-HDMI connector
- STEMMA QT/Qwiic connector
- Utility, CEC and HotPlug pins
- reset button
- Slide switch
- Dimensions: 52.5 x 20.2 x 4.9mm
Kit contains
- PiCowbell DVI Output Module
- 2 x 20-pin male goldpin connector
1185638
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 2246
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
zł29.90
24h
Available quantity: 28
Available
Other products in the same category (16)
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
zł18.91
24h
Available quantity: 15
Available
Expansion module designed for Raspberry Pi Pico boards. Allows you to add CAN bus based communication to your project. Waveshare Pico-CAN-B
zł72.10
24h
Available quantity: 2
Available
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
zł78.47
24h
Available quantity: 10
Available
Module with 3-color e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9-B
zł79.67
24h
Available quantity: 6
Available
The expansion board with the LoRa E22-400T22S module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 21642
zł262.49
24h
Available quantity: 2
Available
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
zł110.42
24h
Available quantity: 2
Available
Expansion module with audio and video outputs dedicated to Raspberry Pi Pico boards. It has a VGA output, SD card slot, audio outputs and control buttons. Pimoroni PIM553
zł131.14
24h
Available quantity: 4
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
zł20.98
24h
Available quantity: 2
Available
Module with a 3-color e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. Communication via the SPI interface. Waveshare Pico-ePaper-4.2-B
zł137.92
24h
Available quantity: 1
Available
A set of goldpin male connectors intended for Raspberry Pi Pico boards. The set includes two 20-pin strips and one 3-pin strip with a pitch of 2.54 mm. Soldered connectors enable easy connection of expansion modules and other accessories
zł1.83
24h
Available quantity: 49
Available
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635
zł268.87
24h
Available quantity: 2
Available
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
zł45.57
24h
Available quantity: 2
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
zł39.82
24h
Available quantity: 6
Available
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
zł71.76
Delivery date unknown
No product available!
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. SB Components 21352
zł76.95
24h
Available quantity: 2
Available
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
zł29.90
24h
Available quantity: 9
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745