iNode Care Sensor 1 (orange) - wireless motion and temperature sensor

Description

iNode Care Sensor # 1 is a wireless motion and temperature sensor with built-in event memory (recorder). It is intended mainly for home automation and care for the elderly. The sensor allows detecting the movement of objects to which it is attached. These can be, for example, entrance doors, windows, doors from the refrigerator, container with medicines. It also allows you to determine the position relative to the ground plane.

The device status is sent on-line in the broadcast frame every ca. 1.28 seconds and can be archived in the internal memory along with the date and time of the event. This allows you to determine if and when the drawer, refrigerator, bag etc. was opened. The sensor can work with iNode Care Relay . The device configuration software allows you to specify the conditions that will be fulfilled by sending an alarm, and thus turning on / off the external device.

properties

Bluetooth Low Energy (BLE)

• Configurable from PC:
  • Power with which the device operates in the range from -18dBm to + 8dBm (maximum range up to 200m in open space)
  • device name
  • Threshold temperature value that sends an alarm
  • On. / Off. alarm caused by movement or change of position
  • The type of archived information
  • Group (logical network) to which alarms are sent
  • user password
  • Device access password; independent of the user's password, password for authorizing the application for a smartphone or PC (protects it against being copied and used by another client)

Power

• CR2032 battery

Housing

• plastic
• Dimensions: Ø 32mm x 9.5mm

others

• The possibility of remote software replacement
  • alternative firmware: iNode Control ID
• Two LEDs
• 10-bit or 14-bit motion sensor, 3-axis accelerometer
• Temperature sensor with a resolution of 1 ° C
• Working temperature: from -30 to 65 ° C
• Humidity: 35-80% RHG
• Weight: 5g

Equipment

• CR2032 battery

Software

• Windows NT / XP / Vista / 7.0 / 8.0 / 8.1 / 10.0

The iNodeSetup.exe configuration software works only on Windows with a Bluetooth adapter based on the CSR 8510 chipset or iNode Serial USB Transceiver, iNode LAN.

Usage

• Home automation
• Alarm systems and property protection
• Care for older people

You can also buy a USB 4.0 Bluetooth adapter available in our offer .

To download

• Instructions for iNode Care Sensor # 1
• Applications for ANDROID and WINDOWS
• The CSR 101x chipset
• Current firmware versions for iNode products are available on the support website: http://support.elsat.com.pl/
  User: inode
  Password: missing