New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
Pololu 1934 - JST RCY Connector Pack, Female
ID: 210568
zł16.78
Tax included
zł13.64 tax excl.
JST RCY Connector Pack, Female
JST RCY Connector Pack, Female
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) interface and is being used with battery packs for RC applications. The connector is keyed so it can not be reversed. You can use a crimping tool to attach your connectors to your 22- to 28-AWG wires. This pack contains enough housings and crimp pins (including two spare pins) for 3 female connectors .
This JST RCY plug is also referred to as a BEC (battery eliminator circuit) interface and is being used with battery packs for RC applications. The connector is keyed so it can not be reversed.
This pack contains enough housings and crimp pins (including two spare pins) for three female connectors. The crimp pins are designed for 22- to 28-AWG wires, and we sell a crimping tool that works well with them. As an alternative, we sell a pre-crimped version of this connector with 10 cm leads.
Note: these connectors are sometimes referred to as "small" in the RC hobby industry.
 |
 |
| Female JST plug dimensions (in mm). |
|---|
 |
| Female JST connector crimp pin dimensions (in mm). |
|---|
People often buy this product with:
 |
JST RCY Connector Pack, Male |
 |
Female Crimp Pins for 0.1 "Housings 100-Pack |
 |
Crimping Tool: 0.1-1.0 mmÂ? Capacity, 16-28 AWG |
210568
Data sheet
- Montage
- Inny
- Pitch
- Other
- Number of pins
- 2
- Connector type JST
- RCY
- Angled/straight
- Straight
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A pair of JST plugs (male and female) with 95mm cables, can be successfully used as a power connector
zł2.50
24h
Available quantity: 463
Available
Crimping tool for insulated and uninsulated plugs of various types, with cutting function. NAR0012-1
zł24.93
24h
Available quantity: 1
Available
Other products in the same category (16)
A 2-pack of adapter boards with 2-pin JST SH side-entry connectors for Pololu single-shaft micro metal gearmotors. Enables easy power wiring in space-constrained electronic or robotic projects. Pololu 5098
zł7.01
24h
Available quantity: 5
Available
JST SH type connector, 1.0 mm pitch, surface mounted, horizontal spatial orientation. The set includes 10 connectors
zł2.73
24h
Available quantity: 25
Available
Angled male socket, cable-to-wire type JST PH, 2-pos., 2mm pitch, 100V, 2A
zł2.10
24h
Available quantity: 30
Available
Adapter for the 6-pin JST SH connector (horizontal) with a pitch of 1 mm to the DIP holes, pitch of 2.54 mm. The set includes 3 modules. Pololu 4773
zł13.42
24h
Available quantity: 9
Available
Pololu 4814 is a set of two JST SH 4-pin top-entry adapters that allow easy integration of JST SH wires with breadboards and prototype boards. With support for voltages up to 50 V and currents up to 1 A per pin, these adapters are suitable for a wide range of applications in electronics and automation.
zł7.18
24h
Available quantity: 5
Available
Angled male socket, wire-board type, for JST PH-2.0 wires, 6-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
zł2.12
24h
Available quantity: 11
Available
Straight male socket, wire-plate type, for JST PH-2.0 wires, 8-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
zł2.90
24h
Available quantity: 53
Dostępny
Pololu 5651 is an adapter that enables integration of JST PH and SH wires with circuits using a 2.54 mm pitch. Thanks to its compact design and the side-entry PH connector, it is suitable for projects with limited space and where wires need to be routed parallel to the PCB.
zł6.15
24h
Available quantity: 3
Available
JST SH type connector, 1.0 mm pitch, surface mounted, horizontal spatial orientation. The set includes 10 connectors
zł3.31
24h
Available quantity: 42
Available
Pololu 5658 is a breakout board for JST PH and SH 6-pin connectors, enabling integration with systems using a 2.54 mm pitch. With support for six channels and mounting holes, it is suitable for projects requiring stable multi-wire connections in prototypes and electronic devices.
zł7.81
24h
Available quantity: 5
Available
Pololu 4810 is a set of two JST SH 2-pin adapters that enable connecting JST SH wires to breadboards or prototype circuits. Thanks to compatibility with JST SH wires and the standard 2.54 mm pitch, the adapter facilitates quick prototyping and integration in electronic projects.
zł6.38
24h
Available quantity: 6
Available
JST SH type connector, 1.0 mm pitch, surface mounted, horizontal spatial orientation. The set includes 10 connectors
zł3.08
24h
Available quantity: 88
Available
Pololu 5652 is an adapter that allows connection of 3-wire JST PH and SH connectors to circuits with 2.54 mm pin headers. Applications include sensors, communication modules, and servo systems. The adapter is a convenient tool for quick integration of wires with prototyping boards.
zł6.59
24h
Available quantity: 4
Available
JST SH type connector, 1.0 mm pitch, surface mounted, vertical spatial orientation. The set includes 10 connectors
zł2.87
24h
Available quantity: 69
Available
JST SH type connector, 1.0 mm pitch, surface mounted, vertical spatial orientation. The set includes 10 connectors
zł3.08
24h
Available quantity: 94
Available
Straight male socket, wire-plate type, for JST PH-2.0 wires, 10-pin, 2mm pitch, 100V, 2A. Set of 10 pieces
zł2.36
24h
Available quantity: 33
Available
JST RCY Connector Pack, Female