LED-ALM-PCV3W-12V WARM

Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461

Adafruit 1463

Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354

Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM336

LED module dedicated to low-power lighting, ideal for desk lamps and creative lighting housings. Equipped with a micro USB connector and a light sensor, it is easy to power from computers or laptops, and thanks to its compact dimensions and simple layout, it can be easily integrated into various projects, offering the possibility of connecting an additional switch. Kitronik 3562

8x16 LED matrix equipped with colored LEDs and a driver. It is powered by 5 V and communicates via the I2C interface (Gravity connector). DFRobot DFR0522

IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. RED matrix. Adafruit 3134

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °

COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °

The ring has eight RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from the 5V range, only one signal line is required to control it. NeoPixel Ring 8 x WS2812

RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047

Ring light with 24 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-24

Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: YELLOW. Adafruit 2948