RGB LED module with 7 WS2812 LEDs
ID: 584131
5906623461417
zł7.60
Tax included
zł6.18 tax excl.
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with 7 RGB LEDs WS2812. Their special feature is the driver included in the structure, which interprets the signals from the LED input and shifts them to its output at the right moment or controls the LED structure. Each of the diodes is connected in series with the neighboring one (signal output to the input of the adjacent diode), thanks to which the whole creates a shift register. The control takes place via one wire, on which appropriately formed pulses are applied, addressing the WS2812 diode sequence. After addressing the entire matrix of diodes, an impulse follows which enables the display of the content of each cell.
Modules can be combined in rows (keeping in mind the technical limits of the control system). It is also possible to connect with a strip or other module with WS2812 diodes.
Features
- 7 RGB LEDs (WS2812)
- Supply voltage: 5V
- Current consumption: max. 60 mA per diode
- Each of the primary colors of the diode (R, G, B) can adopt up to 256 levels of brightness
- The possibility of obtaining a color in one of over 16.7 million color shades
- Laminate color: black
- It has solder pads that allow you to solder the wires
584131
You might also like
Light ring with 32 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
zł16.88
Delivery date unknown
No product available!
Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
zł5.60
24h
Available quantity: 58
Available
Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
zł3.15
24h
Available quantity: 27
Available
Other products in the same category (16)
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °
zł22.37
24h
Available quantity: 9
Available
LED diode 10LED red - bargraph, replacement for: DC-10EWA
zł6.00
24h
Available quantity: 8
Available
Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12
zł34.02
24h
Available quantity: 2
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °
zł12.60
24h
Available quantity: 6
Available
RGB LED matrix display with a resolution of 64x64 (4096 LED). It has cutouts at an angle of 45° to build an LED cube. Adafruit 5407
zł359.41
24h
Available quantity: 2
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °
zł9.84
24h
Available quantity: 13
Available
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
zł43.95
24h
Available quantity: 2
Available
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
zł79.06
24h
Available quantity: 4
Available
RGB LED WS2812B 8 x 4 matrix module for Raspberry Pi, one signal pin, additional power connector, direct RPI computer overlay. Waveshare RGB LED HAT
zł44.55
24h
Available quantity: 2
Available
No product available!
Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013
zł76.49
24h
Available quantity: 4
Available
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł27.80
24h
Available quantity: 3
Available
The module is equipped with three RGB SK6812 LEDs. It is designed to work with the M5Stack sets. Communicates via a single-wire digital interface. M5Stack U003
zł25.90
24h
Available quantity: 1
Available
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 600 mA, offering a wide beam angle of 120 °
zł15.73
24h
Available quantity: 5
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 900 mA, offering a wide beam angle of 120 °
zł24.34
24h
Available quantity: 9
Available
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control