Module with 7 RGB LEDs WS2812. Their special feature is the driver included in the structure, which interprets the signals from the LED input and shifts them to its output at the right moment or controls the LED structure. Each of the diodes is connected in series with the neighboring one (signal output to the input of the adjacent diode), thanks to which the whole creates a shift register. The control takes place via one wire, on which appropriately formed pulses are applied, addressing the WS2812 diode sequence. After addressing the entire matrix of diodes, an impulse follows which enables the display of the content of each cell.
Modules can be combined in rows (keeping in mind the technical limits of the control system). It is also possible to connect with a strip or other module with WS2812 diodes.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Light ring with 32 RGB LEDs, type WS2812, controlled by a serial signal. The module can be powered by 5V, only one signal line is required to control it.
No product available!
Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
Matrix with 4 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control
Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-R
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
Crowtail-LED Bar 2.0 is a compact data visualization module with 10 LED segments, intended for projects based on Arduino and the Crowtail system. It enables graphical representation of levels and values, and thanks to the cascading function it is suitable for more advanced indicators and light animations.
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
Module with yellow LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-Y
8-segment display module, 4 digits with commas
No product available!
LED display module with three LEDs in red, yellow and green. Perfect to be used as a traffic light
This is the second version of the Flora NeoPixels, which runs at at \'high speed\' 800KHz communication. Adafruit 1260
No product available!
A module for building a rear bicycle light using 1000 mCd red LEDs. Power supplied by AA batteries, which are not included in the kit. Kitronik 2106
Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. DFRobot DFR0474
A set of 20 modules with RGB diodes with a diameter of 12.5 mm. The diodes have a 24-bit range of colors. Adafruit 1559
No product available!
Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-R
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control