

zł2.36 tax excl.
The 626ZZ bearing is a small, precision deep groove ball bearing with dimensions of 6×19×6 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers
The 626ZZ bearing is a small, precision deep groove ball bearing with dimensions of 6×19×6 mm (inner diameter × outer diameter × width). It features double-sided metal shields that effectively protect against dust and small particles, although they do not provide full waterproof sealing.Made of chrome steel, the bearing offers high wear resistance and durability. As a single-row deep groove ball bearing, the 626ZZ is extremely versatile – its simple, non-separable design allows it to operate at high and even very high speeds. The deep raceways and precise ball-to-raceway fit enable it to carry both radial and axial loads in both directions, while maintaining reliability and requiring minimal maintenance.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pulley GT2 30T B5 for a shaft with a diameter of 5 mm. It has 30 teeth, suitable for a 6mm wide belt
Trapezoidal screw, length 400 mm, diameter 8 mm and pitch 2 mm, supplied with a nut. Used for drives in 3D printers
No product available!
Pulley GT2 40T B12 for a shaft with a diameter of 12 mm. It has 40 teeth, suitable for a 6mm wide belt
Flexible shaft coupling with a diameter of 8 mm and 10 mm. It is made of aluminum, has a diameter of 25 mm and a length of 30 mm
Pulley GT2 40T B6.35 for a shaft with a diameter of 6.35 mm. It has 40 teeth, suitable for a 6mm wide belt
The YATO YT-06680 set contains 470 bearing steel balls in 11 different sizes, allowing for wide use in service and repair work.
Eccentric spacer with an internal diameter of 5 mm. Allows adjustment of the roller pressure on V-Slot aluminium profiles in 3D printers or CNC machines.
Silicone pad with a working temperature of up to 200°C. Used to level tables in 3D printers as an alternative to a set of springs
Pulley GT2 36T B5 for a shaft with a diameter of 5 mm. It has 36 teeth, suitable for a 6mm wide belt
GT2 belt 10 mm wide. Used as a drive transmission element in small devices such as a plotter or 3D printer
No product available!
Pulley GT2 36T B5 for a shaft with a diameter of 5 mm. It has 36 teeth, suitable for a 10mm wide belt
The 625ZZ bearing is a small, precision deep groove ball bearing with dimensions of 5×16×5 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers. These bearings are typically made of chrome steel, providing good durability and wear resistance.
Nut with M4 thread for screwing the table to the 3D printer
Pulley GT2 40T B8 for a shaft with a diameter of 8 mm. It has 40 teeth, suitable for a 6mm wide belt
Cooling fan powered with the voltage of 5 V with a lead out a cable with a two-pin connector with a pitch of 2.54 mm
Pulley GT2 60T B5 for a shaft with a diameter of 5 mm. It has 60 teeth, suitable for a 6mm wide belt
The 626ZZ bearing is a small, precision deep groove ball bearing with dimensions of 6×19×6 mm (inner diameter × outer diameter × thickness). It features double metal shields that protect against dust and small contaminants, although they are not fully waterproof. Ideal for use in model making, 3D printers, small electric motors, or guide rollers