Analog MEMS Microphone Breakout - ICS-40180 analog microphone module
ID: 585028
zł34.64
Tax included
zł28.16 tax excl.
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with analog MEMS ICS-40180 microphone and amplifier, which allows direct connection to the ADC converter on the microcontroller. The microphone used is omni-directional, which means that it is good at picking up sound sources from all directions. The microphone port is located on the bottom of the board, so keep this in mind when installing the module in the project. The sensor will allow you to add sound to the application, it will allow you to detect voice, clap or slam the door. Full documentation with examples of use is available in the guide.
Features
- MEMS analog microphone
- -3 dB drop at 60 Hz and 19.7 kHz
- Supply voltage from 1.5 V DC to 3.6 V DC
- 40 mW output
- OPA344 provides an output impedance of 600 Ω
- SNR 65 dBA
585028
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.09
24h
Available quantity: 7000
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł6.32
24h
Available quantity: 320
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł6.32
24h
Available quantity: 218
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł6.16
24h
Available quantity: 87
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł6.21
24h
Available quantity: 78
Available
Other products in the same category (16)
Gravity: Analog Sound Sensor is a sound sensor with Gravity analogue output. The module can be supplied with 3.3 ... 5V voltage. DFRobot DFR0034
zł22.48
24h
Available quantity: 1
Available
MEMS microphone module that will allow voice detection, sound recording or audio transmission. It communicates via an I2S interface. DFRobot SEN0526
zł24.03
24h
Available quantity: 5
Available
Module with electret microphone and LM393 amplifier that will allow you to detect voice, clap, slam doors and other sounds using analog or digital output
zł4.16
24h
Available quantity: 2
Available
Module with the WM8960 audio codec, which allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Waveshare WM8960 Audio HAT
zł74.39
24h
Available quantity: 2
Available
A module with an electret microphone and an amplifier that will allow you to detect a voice, a clap or a door slam using the analog output
zł14.87
24h
Available quantity: 23
Available
A module with an electret microphone and amplifier that will allow you to detect voice, clap, slam doors and other sounds using an analog or digital output. SparkFun SEN-14262
zł61.91
6 weeks
No product available!
A volume sensor designed to detect loud ambient sounds. The module uses a microphone and LM2904 amplifier. The output value (analog signal) depends on the volume of the detected sound. In order to eliminate interference, the microphone signal is subjected to double filtering. Seeed studio 101020063
zł37.11
24h
Available quantity: 2
Available
Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano
zł100.02
24h
Available quantity: 6
Available
Module with PDM microphone. It allows you to receive a sound signal and send it using PDM modulation. Adafruit 3492
zł26.65
24h
Available quantity: 10
Available
BOB-09868 - Breakout Board for ADMP401 MEMS Microphone, SparkFun
zł73.16
4 weeks
No product available!
A module with a MEMS microphone that will allow you to detect a voice, a clap or a door slam. The board has an analog output. DFRobot SEN0487
zł14.32
24h
Available quantity: 8
Available
Module with an analog sound intensity sensor. It enables measurement in the range from 30 dB to 130 dB with a measurement error of ± 1.5 dB. The module returns the output voltage in the range of 0.6 to 2.6 V. DFRobot SEN0232
zł191.07
4 weeks
No product available!
Audio Analyzer is a module with sound analyzer based on the MSGEQ7 system. It divides the sound into seven frequency bands, and then allows you to read the peak levels of each band. It allows you to measure the sound in the following frequencies: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. DFRobot DFR0126
zł93.62
24h
Available quantity: 1
Available
A module with an electret microphone, amplifier and ADC converter dedicated to micro: bit. It communicates via the I2C interface. SparkFun SEN-15289
zł40.61
24h
Available quantity: 2
Available
Module with MEMS type microphone (SPH0645LM4H-B). It allows you to receive a sound signal and send it using the I2S audio interface. Powered by 1.6 ... 3.6V voltage. Adafruit 3421
zł40.13
24h
Available quantity: 5
Available
MEMS SPM1423 digital microphone module with PDM modulation. It communicates via the I2S interface. M5Stack U089
zł22.90
24h
Available quantity: 2
Available
A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011