gator:microphone - a module with a microphone for micro:bit
ID: 584188
5906623420766
zł40.61
Tax included
zł33.02 tax excl.
A module with an electret microphone, amplifier and ADC converter dedicated to micro: bit. It communicates via the I2C interface. SparkFun SEN-15289
Description
Module with electret microphone, LMV324 amplifier and ADS1015 ADC. The board has large pads dedicated for "crocodile" cables, which facilitate connection to the micro:bit. The module allows you to detect voice, clap, slam doors and other sounds. It can be powered with the voltage ranging from 2.7 to 5.5 V (in the case of connection to the micro: bit, the module must be powered with 3.3 V), and communication is via the I2C interface. Full documentation is available on the product page.
Features
- ADS1015
- Operating Voltage (VDD): 2.0V-5.5V
- Operating Temperature: -40°C to 125°C
- Operation Modes: Single-Shot, Continuous-Conversion (Default), and Duty Cycling
- Analog Inputs:
- Measurement Type: Single-Ended (Default)
- Input Voltage Range: GND to VDD
- Full Scale Range (FSR): ±.256V to ±6.114V (Default: 2.048V)
- Resolution:
- 12-bit (Differential) or 11-bit (Single-Ended)
- LSB size: 0.125mV - 3mV (Default: 1 mV)
- Sample Rate: 128 Hz to 3.3 kHz (Default: 1600SPS)
- Current Consumption (Typical): 150μA-200μA
- I2C Address: 0x48
- Electret Microphone
- Operating Voltage: 1.5V (Max 10V)
- Supply Current: 0.3mA (Max)
- Directivity: Omnidirectional
- Frequency Response: 20-16,000Hz
- LMV324 Op-amp
- Operating Voltage: 2.7V-5.5V
- Supply Current: ~300-720µA
584188
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A set of 10 colored wires with 50 cm long crocodile clips.
zł12.34
24h
Available quantity: 44
Available
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 17
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
Delivery date unknown
No product available!
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362
zł321.01
Delivery date unknown
No product available!
10-pin connection cable with a length of 20 cm, terminated with a male goldpin plug and alligator connectors
zł10.37
24h
Available quantity: 8
Available
10-pin connection cable with a length of 20 cm, terminated with a female goldpin plug and alligator connectors
zł12.09
Delivery date unknown
No product available!
Other products in the same category (16)
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005
zł67.45
24h
Available quantity: 3
Available
The IO expansion module is designed to work with the micro: bit educational board. There are 19 IO pins on the board, a buzzer and a voltage stabilization circuit are placed. DFRobot MBT0008
zł27.75
24h
Available quantity: 1
Available
Board with goldpin connectors designed for micro:bit sets. It enables connection of a micro: bit set and attaching a module with connectors, eg to a contact plate. Adafruit 3695
zł50.54
4 weeks
No product available!
Qwiic adapter designed for micro:bit educational modules. Facilitates access to all pins that are led out on the connector with a pitch of 2.54 mm and the Qwiic connector. SparkFun BOB-16446
zł35.46
24h
Available quantity: 1
Available
Soil moisture sensor dedicated to micro:bit. It is supplied with the voltage from 3.3 V to 5 V and communicates via an analog signal. SparkFun SEN-15272
zł48.84
24h
Available quantity: 3
Available
The module with a heart rate sensor and the SpO2 level dedicated to micro:bit. It is based on the MAX30102 chip and communicates via the I2C interface. SparkFun SEN-15271
zł73.84
24h
Available quantity: 1
Available
Kitronik 5643, known as LAMP:bit, is a module designed for the BBC micro:bit that replicates the function of a streetlight. It features a white LED and a phototransistor, allowing for the simulation of automatic lighting activation at dusk. This module is an excellent educational tool for learning the basics of programming and understanding how urban lighting systems operate.
zł29.77
24h
Available quantity: 10
Available
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
zł30.90
4 weeks
No product available!
The IO expansion module is designed to work with the micro:bit educational board. There are 20 IO pins on the board, a buzzer, audio output and voltage stabilization circuit
zł29.89
4 weeks
No product available!
Data logger dedicated to micro:bit. It connects to the module via the UART interface and allows you to save data on a microSD card. SparkFun DEV-15270
zł73.80
24h
Available quantity: 1
Available
The power module is designed to work with BBC micro:bit boards. It is equipped with a buzzer and a CR2032 battery socket. Kitronik 5610-V2
zł30.92
3 weeks
No product available!
Adapter designed for micro:bit educational modules. It facilitates access to all pins, which are led out on the connector with a raster of 2.54 mm, which allows the use of a breadboard. SB Components 14880
zł31.89
24h
Available quantity: 2
Available
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
zł44.28
24h
Available quantity: 2
Available
Silicone case designed for the micro:bit educational module. Yellow color. Seeed Studio 114991667
zł23.83
24h
Available quantity: 12
Available
Protective case for micro:bit modules designed with protection in mind. It is transparent, has large and legible labels for buttons A and B, and full access to the bottom pins of the micro:bit. Kitronik 56102
zł20.58
24h
Available quantity: 7
Available
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
zł115.60
24h
Available quantity: 2
Available
A module with an electret microphone, amplifier and ADC converter dedicated to micro: bit. It communicates via the I2C interface. SparkFun SEN-15289