Inventor's Kit for micro:bit v2 - starter kit with learning module micro:bit v2
ID: 581868
zł321.01
Tax included
zł260.98 tax excl.
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362
Description
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables.
Micro:bit v2 is an educational module with a 32-bit ARM Cortex-M4 processor designed for the youngest in order to interest them in computer engineering. On the board with dimensions of 52 x 43 mm there are, among others accelerometer, magnetometer, temperature sensor, LED matrix, touch button, as well as Bluetooth and USB connectivity. The module can be programmed by e.g. by the popular MakeCode editor. The manufacturer also provides a mobile application, available for Android and iOS phones, with which you can send the code to the device via Bluetooth connectivity. The set includes a short microUSB-USB cable, a basket for two AAA batteries, and two AAA batteries. A user guide and a dedicated set of lessons are available on the product page.
Comparison micro:bit and micro:bit v2
| micro:bit v1.5 | micro:bit v2 | |
| CPU | ARM Cortex-M0 | ARM Cortex-M4 |
| Flash | 256 kB | 512 kB |
| RAM | 16 kB | 128 kB |
| LED | Matrix 5x5 (red) | Matrix 5x5 (red) |
| Buttons | 2 | 2 + touch |
| Connectivity | 2,4 GHz micro:bit radio Bluetooth 4.0, BLE |
2,4 GHz micro:bit radio |
| Sensors and peripherals |
light |
light |
| Connectors | 25 pin 4 GPIO, PWM, I2C, SPI and power supply 3 ring connectors |
25 pin 4 GPIO, PWM, I2C, SPI and power supply 3 ring connectors |
| Power supply | 5 V microUSB 3 V edge connector |
5 V microUSB |
Features
- Microcontroller with ARM Cortex-M4 64 MHz core with FPU
- 512 KB Flash
- 128 KB of RAM
- LED matrix 5x5 (red)
- Two programmable buttons, tactile logo
- MEMS microphone and LED indicator
- Light sensor, compass, accelerometer, temperature sensor and speaker
- 2.4 Ghz micro: bit Radio / BLE 5.0 Smart Antenna
- 25 pin edge connector
- 4 dedicated GPIO, PWM, I2C, SPI
- Three digital / analog I / O ports
- Two power ports: 3V and GND
- Dedicated I2C bus for peripheral devices
- MicroUSB (5V) connector
- JST-PH battery connector
- Power / reset button with status LED
- Programming in C++, MakeCode, Python, Scratch
Kit contains
- Educational module micro: bit v2
- SparkFun micro: bit Breakout (with connectors)
- Prototype board
- 2xAAA battery basket
- Servo
- Temperature sensor TMP36
- Photoresistor
- USB Micro-B cable
- Connecting cables
- Crocodile clips
- RGB LED
- Red, blue, yellow and green LEDs
- 10K potentiometer
- 4 x Color button
- Mini power switch
- Speaker
- 100 Ohm resistors
- 10 kOhm resistors
581868
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Educational micro:bit module with 32-bit ARM Cortex-M4 microcontroller. Manufactured to interest the youngest in computer engineering. SparkFun DEV-17287
zł72.90
24h
Available quantity: 50
Available
Starter kit with micro:bit v2. In addition to the micro:bit v2 board, the set includes a microUSB-USB cable, a battery basket and two AAA batteries. SparkFun DEV-17288
zł94.89
24h
Available quantity: 16
Available
Other products in the same category (16)
Extension module with environmental sensors designed for micro: bit. Can be programmed with MakeCode or Mind+. DFRobot MBT0034
zł566.53
24h
Available quantity: 2
Available
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
zł84.48
24h
Available quantity: 1
Available
Multifunctional micro:bit expansion module with built-in Li-Ion battery. The board is equipped with a two-channel DC motor driver, 9 IO pins, I2C, UART interface, buzzer, 4 RGB LEDs and a charging circuit. DFRobot MBT0005
zł67.45
24h
Available quantity: 3
Available
Expansion module compatible with micro:bit. The board is equipped with a 24 V 2 A relay, two buffer inputs, two sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM371
zł82.73
24h
Available quantity: 3
Available
Micro: Circular RGB LED is an expansion board designed for use with the micro: bit module. It has been equipped with 24 RGB LEDs, a buzzer and a microphone. The board is supplied with voltage in the range of 3.5 ... 5 V. DFRobot ROB0150
zł84.98
24h
Available quantity: 2
Available
A module with an electret microphone, amplifier and ADC converter dedicated to micro: bit. It communicates via the I2C interface. SparkFun SEN-15289
zł40.61
24h
Available quantity: 2
Available
A set for building an interactive teddy bear-shaped pendant based on a micro:bit. It consists of a micro:bit v2 educational module, a scroll:bit module with a matrix display, a lanyard and a battery. Pimoroni PIM362
zł275.72
24h
Available quantity: 1
Available
Kitronik 2708 is a relay module designed to work with the BBC micro:bit, allowing control of higher voltage circuits using signals from the micro:bit. Equipped with an electromagnetic relay, it enables safe switching of external devices such as motors or lighting, making it ideal for projects that require control over larger loads.
zł4.46
24h
Available quantity: 10
Available
A module with a set of environmental sensors (pressure, temperature and humidity sensor, light sensor, MEMS microphone) designed for micro:bit. Pimoroni PIM355
zł116.95
24h
Available quantity: 3
Available
An accessory from the gator:boards series. The board has large pads dedicated for crocodile-type wires for easy connection to the micro:bit. It includes a temperature sensor module (MCP9700), a light sensor (TEMT6000) and an RGB LED board. SparkFun SEN-14891
zł38.90
3 weeks
No product available!
Edge Breakout for micro: bit is an expansion board for the micro: bit module. It offers leaded I / O pins on a 3 x 25 pin gold pin connector. There are available anlog entries, GPIO pins, I2C and SPI interfaces, as well as power pins. Edge Breakout for micro: bit
zł42.05
4 weeks
No product available!
Transparent case made of tinted plastic, designed for micro:bit educational modules. Adafruit 4852
zł16.29
24h
Available quantity: 3
Available
The IO expansion module is designed to work with the micro:bit educational board. There are 20 IO pins on the board, a buzzer, audio output and voltage stabilization circuit
zł29.89
4 weeks
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with micro:bit. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM353
zł88.29
24h
Available quantity: 2
Available
Set of "sleeping lion" with the educational module micro: bit. It consists of a main plate, noise: bit and felt elements, thread and needle to create the toy. Pimoroni PIM363
zł226.15
24h
Available quantity: 2
Available
The pin expander is designed to work with the micro:bit educational board. Facilitates the construction of device prototypes. SB Components 20645
zł41.71
24h
Available quantity: 2
Available
Starter kit with micro:bit v2. The set includes the most necessary elements needed to implement micro:bit projects: LEDs, buttons, potentiometer, servo, prototype board and a set of cables. SparkFun KIT-17362