micro: Maqueen Plus is a set for building an interactive robot. It is a small and inexpensive intelligent device equipped with a number of functionalities that will inspire and help you learn new technologies. The user learns the basics of robotics and computer science while improving and coding the robot. micro: Maqueen is based on the popular micro:bit module. The robot is programmed from a computer using such environments as Mind+, Scratch, MakeCode and MicroPython.
The set includes a micro:Maqueen platform (chassis with motors, distance sensor, battery basket, necessary mounting elements). The kit is easy to use and it only takes a few minutes to assemble it. The robot is equipped with numerous sensors that allow it to interact with the device. The robot platform can be controlled by a wireless GamePad.
Attention!
he kit does not include the micro:bit module and Li-Ion 18650 battery. They must be purchased separately.
| 1. Infrared grayscale sensors | 6. Ultrasonic sensor |
| 2. Buzzer | 7. I2C |
| 3. Infrared receiver | 8. Servo port |
| 4. LED | 9. Expansion ports |
| 5. RGB LED | 10. micro:bit socket |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A set for building a balancing robot. It has a board with an ATmega 32u4 microcontroller, engine controllers, modules with quadrature encoders and an IMU system (gyroscope, accelerometer, magnetometer). Pololu 3575
Speaker for micro:bit is an expansion module with a loudspeaker designed for micro:bit with volume control and headphone output. Speaker for micro:bit
No product available!
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274
No product available!
Edge Breakout for micro: bit is an expansion board for the micro: bit module. It offers leaded I / O pins on a 3 x 25 pin gold pin connector. There are available anlog entries, GPIO pins, I2C and SPI interfaces, as well as power pins. Edge Breakout for micro: bit
No product available!
The module with six touch buttons and LED diodes is designed for micro:bit. It uses the CAP1166 driver and communicates via the I2C interface. Pimoroni PIM401
The expansion module is designed for micro:bit v2. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103100063
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano
No product available!
The expansion module is designed to work with the micro:bit educational board. It allows you to build an electronic piano
Transparent protective case designed for micro:bit educational modules. SparkFun PRT-17867
The pin expander is designed to work with the micro:bit educational board. Facilitates the construction of device prototypes. SB Components 20645
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
The power module is designed to work with BBC micro:bit boards. It is equipped with a buzzer and a CR2032 battery socket. Kitronik 5610-V2
Module with the real time clock (RTC) RV-3028 dedicated to micro:bit. It communicates via the I2C interface. SparkFun SEN-15486
Prototyping kit dedicated to micro:bit. It offers pin leads, a contact plate, buttons, LEDs and a buzzer. SB Components 22717
The expansion module is designed for micro:bit sets. Offers a simple, beginner-friendly robotics controller. SparkFun DEV-15713
Starter kit designed to work with micro: bit, which includes 8 modules including the most popular digital and analog sensors and executive modules. DFRobot TOY0086
No product available!
Starter kit for the micro:bit educational module. It includes an expansion module, sensors, motor, servo and the necessary accessories. Cytron EDUBIT-NB
Kit for building a simple educational robot Maqueen micro:bit chassis with engines, distance sensor, battery basket and necessary assembly elements. DFRobot ROB0148