![Main view Main view](https://kamami.pl/102170-large_default/rp2040-microcontroller-development-board-with-1-28inch-round-touch-lcd-accelerometer-and-gyroscope.jpg)
![Main view Main view](https://kamami.pl/102170-large_default/rp2040-microcontroller-development-board-with-1-28inch-round-touch-lcd-accelerometer-and-gyroscope.jpg)
zł99.92 tax excl.
Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The module with a round, color touch LCD IPS 1.28" display with a resolution of 240x240 pixels and an RP2040 chip. The microcontroller has two ARM Cortex M0+ cores operating at up to 133 MHz and 264 kB of RAM. It does not have built-in flash memory, but the board features external memory with a capacity of 16 MB connected via the QSPI interface.
1. USB Type C | 5. RP2040 |
2. ETA6096 | 6. IMU QMI8658C |
3. LDO RT9013-33GB | 7. BOOT Button |
4. 16 MB NOR-Flash W25Q128JVSIQ | 8. RESET Button |
9. Battery Connector |
The display uses a built-in GC9A01A controller that communicates via the SPI interface. It can display content in a full 65K color range. It is equipped with a capacitive touch panel, allowing for a simple interface addition. Additionally, the user has access to a 6-axis IMU QMI8658C combining an accelerometer and gyroscope, a lithium battery charger, and connectors with exposed GPIO pins.
The RP2040 microcontroller is programmed through a USB Type C connector and supports popular programming languages MicroPython and C/C++. The module is enclosed in a CNC metal housing. It is suitable for small IoT projects and building your own watch. Full documentation and example programs are available on the product page.
Cable with USB typ C connectors, cable length 1.8m. Lanberg CA-CMCM-31CU-0018-BK
Cable with USB type A and USB type C plugs, length 1m, white
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 4900
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
Ethernet module with RP2040 microcontroller. It has an embedded CH9120 chip with an integrated TCP/IP protocol stack. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-ETH
Base board with soldered Raspberry Pi Pico module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
No product available!
Board with RP2040 microcontroller and HDMI video connector. Has a built-in LiPo charging circuit and STEMMA QT connector. Allows the use of the Feather module to display data on a monitor. Adafruit 5710
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-M
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM607
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Pimoroni PIM624
Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432
The board with the RP2040 microcontroller, which provides a set of 2x20-pin connectors to which you can connect the HATs of the Raspberry Pi. SB Components 24032
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which operate at a frequency of 133 MHz and 264 kB RAM. The additional ESP8285 system allows communication in the WiFi network. Seeed Studio 102991555
Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B