

Raspberry Pi RPI PIRACK
PiRack Expansion board for Raspberry Pi, PIFACE, RoHS
With the ability to connect up to 4 additional boards, the plug-in PiRack allows users ultimate flexibility in their Raspberry Pi programming. Powered separately to the Raspberry Pi means that the PiRack will not affect performance. This carrier card is part of the PiFace series and can be used with most IO expansion boards that are compatible with the Raspberry Pi IO header. PiRack also enables the Pi Camera Module to be used at the same time. By taking IO expansion boards directly off the Raspberry Pi, PiRack enables the camera module to easily connect onto the Raspberry Pi using to the top mount CSI interface.
Features:
Contents:
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The 10 W AC adapter provides 5 V and 2 A current. It is equipped with a 1.5 m cable with a 2.5 x 2.1 mm plug. Akyga AK-TB-22
Arduino shield designed to work with the Raspberry Pi minicomputer. It is possible to combine the capabilities of the minicomputer and the Arduino board in one device. DFRobot DFR0327
A universal HAT expansion module designed to work with Raspberry Pi minicomputers. It is equipped with a motor controller, audio amplifier, buttons and diodes, and a Qwiic/Stemma QT connector. Pimoroni PIM672
Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO; DFR0357
Module with barcode and QR scanner designed for Raspberry Pi. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22595
The module with 6 capacitive touch buttons and LED diodes, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer via the CAP1166 controller, which communicates via the I2C interface. Pimoroni PIM272
PCIe to M.2 adapter designed to work with the Raspberry Pi 5 minicomputer. It allows you to connect an NVMe SSD with an M.2 connector to the base board via a PCIe connector. Waveshare PCIe TO M.2 Board (C)
Module with a capacitive fingerprint sensor for the Raspberry Pi. It communicates via the UART or USB interface. SB Components 21253
Extension in the form of a HAT overlay with a DVB-T decoder designed for Raspberry Pi. Thanks to the module, it is possible to receive digital terrestrial television broadcast in the DVB-T and DVB-T2 standard. Raspberry Pi TV-uHAT
PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+
HAT module designed to connect e-Paper displays and Raspberry Pi minicomputers. Pimoroni PIM608
A module dedicated to Raspberry Pi power management. It has a built-in RP2040 microcontroller that controls the operation of the device. Waveshare Power Management HAT (B) (EU)
Adapter enabling easy and quick connection of expansion modules compatible with the Modular DuoNect to selected Raspberry Pi platforms (with a 40-pin connector). MOD 80
Module with the Infineon Optiga SLB 9670 TPM 2.0 cryptographic chip. It uses the SPI interface for communication and is compatible with all versions of the Raspberry Pi. LetsTrust TPM
MATRIX Creator is an extension for the Raspberry Pi computer. It has Atmel ATSAM3S2C Cortex microcontroller and programmable FPGA. The board also has communication modules: Zigbee, Z-Wave or NFC. The peripherals are min. pressure sensor with altimeter, 35 RGBW diodes, 8 microphones and many more. MATRIX.C1.EU
No product available!
ZYMKEY 4i is a hardware security module designed for Rasbperry Pi. Supports encryption of system files on the memory card, allows for safe storage and generation of security keys.
PCIe FFC adapter Waveshare (version C) for Raspberry Pi 5 enables the expansion of Pi 5-based systems with full-size PCIe devices. Thanks to compatibility with multiple PCIe standards and the option to connect external 12 V power, it offers a flexible solution for advanced projects requiring integration of expansion cards. Ideal for building custom routers, NAS systems, industrial controllers, and test setups.
PiRack Expansion board for Raspberry Pi, PIFACE, RoHS