Touch pHAT - module with touch buttons for Raspberry Pi

Power management module with RTC clock designed for Raspberry Pi. Allows power to be cut off to the minicomputer and scripting of on/off sequences. Dedicated for use with a 3.7V LiPo battery pack. Adafruit 5705

A module dedicated to Raspberry Pi power management. It has a built-in RP2040 microcontroller that controls the operation of the device. Waveshare Power Management HAT (B) (EU)

Set of cameras and a module that allows connecting two cameras to Raspberry using single MIPI connector. Arducam B0195S8MP

Overlay compatible with Raspberry Pi Zero, Zero W, Zero WH, 1A+, 3A+, 3B, 3B+, 4B. Includes LEDs, buttons, USB-UART converter (USB connector) and buzzer. Cytron Maker pHAT

Extension in the form of a HAT overlay with a DVB-T decoder designed for Raspberry Pi. Thanks to the module, it is possible to receive digital terrestrial television broadcast in the DVB-T and DVB-T2 standard. Raspberry Pi TV-uHAT

PCIe to M.2 adapter that allows you to connect M.2 NVMe SSD drives to Raspberry Pi 5 minicomputers. It works with M.2 SSD drives of sizes 2230/2242 and connects to the minicomputer via a 16-pin PCIe ribbon. Waveshare PCIe TO M.2 HAT+

Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO; DFR0357

ZYMKEY 4i is a hardware security module designed for Rasbperry Pi. Supports encryption of system files on the memory card, allows for safe storage and generation of security keys.

A module with 5 buttons and an RGB diode, designed to work with the Raspberry Pi. The buttons are connected to the minicomputer through the GPIO expander controlled by the I2C interface. Pimoroni PIM301

Arduino shield designed to work with the Raspberry Pi minicomputer. It is possible to combine the capabilities of the minicomputer and the Arduino board in one device. DFRobot DFR0327

Adapter enabling easy and quick connection of expansion modules compatible with the Modular DuoNect to selected Raspberry Pi platforms (with a 40-pin connector). MOD 80

Module with barcode and QR scanner designed for Raspberry Pi. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. SB Components 22595

Module with the Infineon Optiga SLB 9670 TPM 2.0 cryptographic chip. It uses the SPI interface for communication and is compatible with all versions of the Raspberry Pi. LetsTrust TPM

PCIe to M.2 adapter designed to work with the Raspberry Pi 5 minicomputer. It allows you to connect an NVMe SSD with an M.2 connector to the base board via a PCIe connector. Waveshare PCIe TO M.2 Board (C)

MATRIX Creator is an extension for the Raspberry Pi computer. It has Atmel ATSAM3S2C Cortex microcontroller and programmable FPGA. The board also has communication modules: Zigbee, Z-Wave or NFC. The peripherals are min. pressure sensor with altimeter, 35 RGBW diodes, 8 microphones and many more. MATRIX.C1.EU

A universal HAT expansion module designed to work with Raspberry Pi minicomputers. It is equipped with a motor controller, audio amplifier, buttons and diodes, and a Qwiic/Stemma QT connector. Pimoroni PIM672