MongoPi-R3 - development board with Allwinner F1C200S processor
ID: 585165
zł142.41
Tax included
zł115.78 tax excl.
Development board with Allwinner F1C200S processor. It is equipped with 64 MB DDR RAM and 128 MB Nand Flash. It was designed to run under Linux and Python programming. DFRobot DFR0780
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
MongoPi-R3 is a development board with an Allwinner F1C200S processor. It is equipped with 64 MB DDR RAM and 128 MB Nand Flash. It was designed to work under Linux with the ability to support Python programming. Despite the small dimensions, the board has pins with popular peripherals: GPIO ports, I2C, SPI, SDIO, USB Host and OTG interfaces, as well as a built-in microphone and amplifier and an interface for connecting a DVP camera. The module is intended for more experienced Linux and Python users. Full documentation with system preparation instructions is available on the product Wiki page.
Features
- Allwinner F1C200S processor
- Built-in 64MB DDR and 128MB Nand Flash memory
- The default system clock frequency of 420 MHz can be up to 700 MHz
- Full Python support
- Numerous peripherals: GPIO, I2C, SPI, SDIO, USB Host, USB OTG
- Built-in microphone and audio amplifier
- RGB565 display interface and 6-wire touch interface
- DVP camera interface supporting cameras like OV2640, GC0328 etc.
- Support for SDIO WiFi + BT module
- Linux support
- Low energy consumption
Kit contains
- Development board MongoPi-R3
- Connectors kit
585165
You might also like
Available
2 Mpx camera module with OV2640 sensor with a matrix resolution of 1600 x 1200 pixels and transmission speeds up to 60 FSP. Communication via the SCCB interface. It has an M12 lens mount and the attached lens HX-27227. ArduCAM U3359
zł90.07
24h
Available quantity: 3
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.51
24h
Available quantity: 27
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.31
24h
Available quantity: 9
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł4.06
24h
Available quantity: 44
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.70
24h
Available quantity: 113
Available
Other products in the same category (16)
Development board with Bluetooth 5.2 BGM220P module from Silicon Labs. It is equipped with a mikroBUS socket and a Qwiic connector and a 20-pin connector with peripherals such as I2C, SPI, UART and GPIO. SparkFun DEV-17588
zł132.48
24h
Available quantity: 2
Available
MaaXBoard AES-MC-SBC-IMX8M-G - minicomputer with NXP i.MX Quad Arm Cortex-A53 + Cortex-M4F processor
Single board computer with NXP i.MX 8M processor with 2 GB of DDR4 memory, Gigabit Ethernet port, two USB 3.0 ports, HDMI output, MIPI-DSI, MIPI-CSI, WiFi, Bluetooth Low Energy and MicroSD card slot. MaaXBoard AES-MC-SBC-IMX8M-G
zł579.00
6 weeks
No product available!
Module for learning the basics of electronic engineering; illustrates the relationship between voltage, current, and allows the generation and observation of signals. It has the ability to sample the signal up to 200kSPS in a 16-bit converter. Powered from the USB port. ADALM1000
zł559.00
24h
Available quantity: 1
Available
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). EKB DPM-E4750RGBLC
zł9,527.15
6 weeks
No product available!
Love to Code Chibi Clip Mounting Accessory
zł79.03
24h
Available quantity: 1
Available
Beetle BLE is another milestone in wearable electronics device area based Arduino Uno, which makes DIY users have more options in the project design. It is fully compatible with Bluno in instructions and procedures, supporting Bluetooth HID and ibeacon modes. And it not only supports USB programming, but also wireless programming method. DFR0339
zł67.80
24h
Available quantity: 2
Available
No product available!
Evaluation board with nRF52840 microcontroller and bluetooth communication. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in CircuitPython or Arduino IDE. Adafruit 4333
zł140.28
4 weeks
No product available!
Chibitronics Circuit Stickers Effects Add-On Pack
zł163.04
24h
Available quantity: 1
Available
Available
Available
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). EKB DPM-E4750RGBHBLC
zł13,009.02
6 weeks
No product available!
Parallax BASIC Stamp 2 Module #BS2-IC
zł366.27
6 weeks
No product available!
A set with a development board with the nRF51822 chip, designed for learning programming for pupils and students. It is a more extensive alternative to micro:bit educational modules. DFRrobot DFR0840
zł374.38
4 weeks
No product available!
The SparkFun Electric Imp imp002 Breakout allows you to explore the capabilities of the Imp product line in an easy to use package. The imp002 is actually a solder-down module version of the original Imp card. BOB-12958
zł261.62
24h
Available quantity: 1
Available
Love To Code Chibi Chip is an educational module for learning programming designed for beginners of all ages and levels who want to start learning programming without installing software. DEV-14591, Adafruit 3674
zł212.57
24h
Available quantity: 3
Available
Development board with Allwinner F1C200S processor. It is equipped with 64 MB DDR RAM and 128 MB Nand Flash. It was designed to run under Linux and Python programming. DFRobot DFR0780