M5Stack VMeter Unit - digital voltmeter module
ID: 582057
zł126.90
Tax included
zł103.17 tax excl.
Voltmeter module for M5Stack sets. It can measure DC voltage in the range from 0 to 36 V with an accuracy of approx. 0.5 mV. M5Stack U087
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The M5Stack VMeter Unit is a voltmeter module designed for the M5Stack sets. It can measure DC voltage in the range from 0 to 36 V with an accuracy of approx. 0.5 mV. It is based on a 16-bit ADC converter, which communicates with the evaluation kit via the I2C interface (Grove connector). The module has a built-in isolated power circuit, and the I2C interface is also galvanically isolated through the CA-IS3020S low-power isolator, which prevents noise and surges from penetrating the data bus. The voltmeter will be used in projects where accurate voltage measurement is required. Full documentation is available on the product page.
Features
- Measuring range: 0 to 36V
- LED power indicator
- 16 bit ADC conversion
- Overcurrent protection
- Factory calibrated
- Accuracy up to ± 1999
- Minimum resolution: 0.490798455 mV
- Built-in isolation circuit CA-IS3020S, anti-interference
- Isolated DC-DC
- Insulation voltage up to 5000 Vrms
- I2C interface (address 0x49)
- Dimensions: 65 x 24 x 8 mm
- Weight: 9 g
Kit contains
- VMeter Unit module
- Grove cable
582057
You might also like
M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010
zł259.00
Delivery date unknown
No product available!
M5Stack series development kit equipped with ESP32. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K001
Delivery date unknown
No product available!
Other products in the same category (16)
The module with SSR BT136S relay with a load of up to 2 A, designed for M5Stack sets. The board is equipped with a Grove connector and is controlled by a digital input. M5Stack U122
zł40.77
24h
Available quantity: 1
Available
Module with a PIR motion sensor designed for M5Stack modules. It can detect movement up to 5 meters with a detection angle of 100 degrees. M5Stack U004
zł34.90
24h
Available quantity: 3
Available
The module with the GPS AT6558 chip, designed for the M5Stack sets. The system can receive data from the main positioning systems: GPS, GLONASS, BDS, Galileo, QZSS and SBAS. M5Stack U032
zł69.90
24h
Available quantity: 2
Available
Module with a passive buzzer designed for M5Stack sets. It is equipped with a Grove connector and is controlled by a square signal. M5Stack U132
zł28.91
24h
Available quantity: 3
Available
5-port Hub with Grove connectors for M5Stack sets. It allows you to connect several devices with Grove connectors to the evaluation kit. M5Stack Grove-T
zł43.90
24h
Available quantity: 2
Available
Prototyping kit designed for sets from the M5ATOM series. It includes a prototyping board and numerous connectors. M5Stack ATOM HUB DIY Proto
zł56.90
24h
Available quantity: 3
Available
Module with a temperature sensor designed for the M5Stack sets. It allows you to measure high temperatures. The set includes a K-type thermocouple probe. M5Stack U133
zł137.90
24h
Available quantity: 1
Available
Module with a 10 kΩ rotary potentiometer for M5Stack sets. M5Stack U005
zł25.90
24h
Available quantity: 3
Available
ATOM Lite development kit complete with DRV8825 stepper motor driver module. M5Stack ATOM STEPMOTOR
zł97.39
24h
Available quantity: 2
Available
Module with heart rate and SpO2 sensor (oxygen saturation level) MAX30100 designed for M5Stack sets. M5Stack U029
zł54.00
24h
Available quantity: 3
Available
Module with real time clock (RTC) HYM8563 designed for M5Stack sets. It is equipped with a Grove connector and communicates via the I2C interface. M5Stack U126
zł32.90
24h
Available quantity: 3
Available
Kit for building a worm robot. The chassis is equipped with four motors and a controller, 2 RGB diodes and an STM32F030 microcontroller. M5Stack K033
zł94.89
24h
Available quantity: 2
Available
DC-DC Step-Down Converter ME3116AM6G with an output voltage of 5 V, input voltage from 6 to 24 V and a maximum output current of 1 A. Dedicated to the M5Stack modules. M5Stack U125
zł20.90
6 weeks
No product available!
Rotary encoder module dedicated to M5StickC/C-CPlus. It integrates AB rotary encoder with push button function and is powered by built-in battery. M5stack U157
zł49.90
24h
Available quantity: 2
Available
The module is equipped with a button. It communicates via a digital interface and allows you to add simple controls to your M5Stack based project. M5Stack Button Unit
zł14.90
24h
Available quantity: 1
Available
IO port expander for M5Stack kits. Equipped with 8 IO pins and power pins, it communicates via the I2C interface. M5Stack U011-B
zł41.91
24h
Available quantity: 2
Available
Voltmeter module for M5Stack sets. It can measure DC voltage in the range from 0 to 36 V with an accuracy of approx. 0.5 mV. M5Stack U087