Rechargeable NiMH Battery Pack: 6.0 V, 2200 mAh, 5x1 AA Cells, JR Connector
This is a rechargeable 6.0 V NiMH battery pack with a capacity of 2200 mAh. The pack consists of five AA cells in a single row and a 4" lead terminated by a “JR”-style connector.
![]() |
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
![]() |
| Cell Type | Capacity (mAh) |
|---|---|
| AA | 2200 |
| AAA | 900 |
| 2/3 AAA | 350 |
| 1/3 AAA | 200 |
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
|
|
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
![]() |
iMAX-B6AC Balance Charger and Discharger |
![]() |
150:1 Micro Metal Gearmotor HP |
![]() |
SpringRC SM-S4303R Continuous Rotation Servo |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Rechargeable NiMH Battery Pack: 4.8 V, 2200 mAh, 4x1 AA Cells, JR Connector
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 800 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP503448
No product available!
INR18650 lithium-ion battery with a nominal voltage of 3.7V and a capacity of 2900mAh, equipped with a PCM protection circuit, designed for powering electronic devices. Akyga AKY2455
No product available!
Rechargeable NiMH Battery Pack: 4.8 V, 900 mAh, 4x1 AAA Cells, JR Connector
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 560mAh, equipped with a PCM protection circuit with an NTC temperature sensor and a lead with a 3-pin Molex 1.25 connector, 80mm long. Akyga AKY0833
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 190 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP402030
No product available!
INR18650 lithium-ion battery with a nominal voltage of 3.6V and a capacity of 3350mAh, designed for powering electronic devices and battery systems. Akyga AKY1382
No product available!
LP803450 lithium-polymer battery with a nominal voltage of 3.7 V and a capacity of 1500 mAh, equipped with a PCM protection circuit and a 150 mm lead terminated with a JST 2.54 2-pin connector. Akyga AKY0647
No product available!
The VIPOW 6 V 7 Ah gel battery is designed for both cyclic and standby use, offering high operational stability and long service life thanks to its gel-type electrolyte and sealed construction. It is used in backup systems, solar installations, mobile devices, alarms, and recreational vehicles. Its low self-discharge rate allows for long-term storage without loss of performance parameters.
Li-Ion 18650 battery with a nominal voltage of 3.6 V and a capacity of 3300 mAh. It has overcharge, over discharge, overload and short circuit protection
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.7V and a capacity of 2600mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0559
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 110mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0474
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 650 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP603040
No product available!
Akyga AKY0627 battery with a voltage of 3.7 V and a capacity of 3500 mAh, equipped with a PCM module and a 2-pin JST connector. Designed for powering electronic projects, portable devices, and backup power systems.
Ni-MH (nickel metal hydride) battery type AAA/R03 with a capacity of 1050 mAh. It uses low self-discharge (LSD) technology and has a durability of up to 1,200 charging cycles. everActive EVHRL03-1050
Rechargeable NiMH Battery Pack: 4.8 V, 350 mAh, 4x1 2/3-AAA Cells, JR Connector
No product available!
Rechargeable NiMH Battery Pack: 6.0 V, 2200 mAh, 5x1 AA Cells, JR Connector