Rechargeable NiMH Battery Pack: 6.0 V, 900 mAh, 5x1 AAA Cells, JR Connector
This is a rechargeable 6.0 V NiMH battery pack with a capacity of 900 mAh. The pack consists of five AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.
![]() |
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
![]() |
| Cell Type | Capacity (mAh) |
|---|---|
| AA | 2200 |
| AAA | 900 |
| 2/3 AAA | 350 |
| 1/3 AAA | 200 |
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
|
|
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 2500 mAh. Samsung INR18650-25R
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1200 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP883440
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.6 V and a capacity of 3300 mAh. It has overcharge, over discharge, overload and short circuit protection
This 3.7V 470mAh battery is designed to power compact electronic devices requiring a lightweight and stable power source. Featuring PCM protection and high energy density, it\'s suitable for mobile systems, hobby projects, and professional equipment. AKYGA AKY0100
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1100 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP623255
No product available!
Akyga AKY0627 battery with a voltage of 3.7 V and a capacity of 3500 mAh, equipped with a PCM module and a 2-pin JST connector. Designed for powering electronic projects, portable devices, and backup power systems.
The Rebel 12 V 100 Ah gel battery, built from six 2 V cells in a series configuration (6S), provides high capacity and shock resistance, making it a suitable power source for backup power supplies, photovoltaic systems, alarm installations, and recreational and industrial vehicles. Thanks to AGM technology and a sealed construction, it can be operated in any position, even in harsh environmental conditions.
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 800 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP503448
Li-Po battery with a rated voltage of 3.7 V and a capacity of 800 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP453350
The VARTA Solar AA (R6) 800 mAh rechargeable battery is a nickel-metal hydride (Ni-MH) cell, specifically designed to power low-energy devices such as solar lights. It features optimized capacity, allowing for frequent charge and discharge cycles, ensuring long-lasting and reliable operation of devices.
Li-Po battery 3.7V / 750mAh, PCM protection, connector 2 pins, cable length 150mm. Akyga LP403450
Li-Po battery with a rated voltage of 3.7 V and a capacity of 400 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP403035
No product available!
The R3 Ni-MH AAA 1100mAh XTREME battery is a high-quality nickel-metal hydride (Ni-MH) rechargeable battery with a capacity of 1100 mAh and a voltage of 1.2 V, designed to power devices such as digital cameras, portable CD players, toys, tools, and flashlights. It features the ability to withstand over 1000 charge cycles, no memory effect, and excellent resistance to external conditions such as temperature and moisture.
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP601730
No product available!
Rechargeable NiMH Battery Pack: 7.2 V, 350 mAh, 3x2 2/3-AAA Cells, JR Connector
No product available!
Set of 4 Panasonic Eneloop R6/AA rechargeable batteries with a capacity of 2000 mAh and voltage of 1.2V. Packaged in eco-friendly packaging (blister). Panasonic BK-3MCDE/4BE
Rechargeable NiMH Battery Pack: 6.0 V, 900 mAh, 5x1 AAA Cells, JR Connector