Rechargeable NiMH Battery Pack: 4.8 V, 350 mAh, 4x1 2/3-AAA Cells, JR Connector
This is a rechargeable 4.8 V NiMH battery pack with a capacity of 350 mAh. The pack consists of four 2/3-size AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.
![]() |
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
![]() |
| Cell Type | Capacity (mAh) |
|---|---|
| AA | 2200 |
| AAA | 900 |
| 2/3 AAA | 350 |
| 1/3 AAA | 200 |
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
|
|
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
![]() |
Rechargeable NiMH Battery Pack: 4.8 V, 200 mAh, 4x1 1/3-AAA Cells, JR Connector |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
INR18650 lithium-ion battery with a nominal voltage of 3.7V and a capacity of 2900mAh, equipped with a PCM protection circuit, designed for powering electronic devices. Akyga AKY2455
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 110 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP401230
Rechargeable NiMH Battery Pack: 4.8 V, 900 mAh, 4x1 AAA Cells, JR Connector
Li-Po battery with a rated voltage of 3.7 V and a capacity of 300 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP752030
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 850mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0108
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 750mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0655
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 190mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0477
No product available!
The VIPOW 6 V 7 Ah gel battery is designed for both cyclic and standby use, offering high operational stability and long service life thanks to its gel-type electrolyte and sealed construction. It is used in backup systems, solar installations, mobile devices, alarms, and recreational vehicles. Its low self-discharge rate allows for long-term storage without loss of performance parameters.
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0559
No product available!
INR18650 lithium-ion battery with a nominal voltage of 3.7V and a capacity of 2000mAh, equipped with a PCM protection circuit, designed for powering electronic devices. Akyga AKY2457
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 150 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP402025
The Xtreme 12V 4Ah AGM battery is a reliable, maintenance-free power solution for motorbikes and backup systems, offering long life, leak-proof design, and universal application versatility.
Li-Po battery with a rated voltage of 3.7 V and a capacity of 400 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP403035
Lithium-polymer battery type LP405063 with a nominal voltage of 3.7 V and a capacity of 1400 mAh, equipped with a PCM protection circuit and a JST 2.54 2-pin connector on a 150 mm cable. Akyga AKY0535
No product available!
Set of 2 Panasonic Eneloop R3/AAA rechargeable batteries with 800 mAh capacity and 1.2V voltage. Packaged in eco-friendly packaging (blister). Panasonic BK-4MCDE/2BE
Rechargeable NiMH Battery Pack: 4.8 V, 350 mAh, 4x1 2/3-AAA Cells, JR Connector