Rechargeable NiMH Battery Pack: 7.2 V, 900 mAh, 3x2 AAA Cells, JR Connector
This is a rechargeable 7.2 V NiMH battery pack with a capacity of 900 mAh. The pack consists of six AAA cells in two rows and a 4" lead terminated by a “JR”-style connector.
![]() |
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
![]() |
| Cell Type | Capacity (mAh) |
|---|---|
| AA | 2200 |
| AAA | 900 |
| 2/3 AAA | 350 |
| 1/3 AAA | 200 |
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
|
|
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
![]() |
iMAX-B6AC Balance Charger and Discharger |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Akyga AKY0627 battery with a voltage of 3.7 V and a capacity of 3500 mAh, equipped with a PCM module and a 2-pin JST connector. Designed for powering electronic projects, portable devices, and backup power systems.
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1200 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP883440
The Rebel 12 V 5 Ah gel battery, built in a 6S configuration from six 2 V cells, provides reliable power for low-current devices and backup systems. Thanks to AGM technology and a sealed enclosure, it can be used in various positions, and its compact size allows for easy installation in confined spaces. Its low self-discharge rate and resistance to temperature variations make it suitable for both home and mobile applications.
Rechargeable NiMH Battery Pack: 6.0 V, 350 mAh, 5x1 2/3-AAA Cells, JR Connector
AGM battery with a voltage of 6 V and a capacity of 4.5 Ah, designed to provide stable power supply for devices in backup power systems. AGM technology ensures safety, leak resistance, and the ability to operate in various mounting positions. With its wide range of applications, high reliability, and long service life, it is used in UPS installations, security systems, telecommunications, as well as medical and industrial equipment.
Li-Po battery with a rated voltage of 3.7 V and a capacity of 650 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP603040
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1100 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP623255
No product available!
Rechargeable NiMH Battery Pack: 4.8 V, 2200 mAh, 4x1 AA Cells, JR Connector
No product available!
Maintenance-free AGM gel battery 6 V 12 Ah, featuring AGM (Absorbent Glass Mat) technology, with dimensions of 151 x 94 x 50 mm (including connectors), designed for alarm systems, UPS units, telecommunications equipment, toys, and other devices requiring a stable power source
Li-Po battery 3.7V / 750mAh, PCM protection, connector 2 pins, cable length 150mm. Akyga LP403450
everActive R20/D rechargeable batteries with a capacity of 10000 mAh are new-generation cells in Ready To Use technology, intended for intensive use in flashlights, toys and professional devices. They are characterized by high performance, long durability and real capacity confirmed by tests in accordance with the IEC standard.
Rechargeable NiMH Battery Pack: 7.2 V, 350 mAh, 3x2 2/3-AAA Cells, JR Connector
No product available!
Li-Po battery Akyga AKY0156 3.7 V 2500 mAh with PCM circuit and wire terminated with 2-pin JST connector enables safe and compact powering of portable devices. Suitable for applications requiring a flat format and high energy density. Akyga AKY0156
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP601730
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 300 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP752030
No product available!
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Rechargeable NiMH Battery Pack: 7.2 V, 900 mAh, 3x2 AAA Cells, JR Connector