Rechargeable NiMH Battery Pack: 7.2 V, 350 mAh, 3x2 2/3-AAA Cells, JR Connector
This is a rechargeable 7.2 V NiMH battery pack with a capacity of 350 mAh. The pack consists of six 2/3-size AAA cells in two rows and a 4" lead terminated by a “JR”-style connector.
![]() |
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
![]() |
| Cell Type | Capacity (mAh) |
|---|---|
| AA | 2200 |
| AAA | 900 |
| 2/3 AAA | 350 |
| 1/3 AAA | 200 |
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
|
|
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Maintenance-free gel battery 12 V 72 Ah made with AGM technology, measuring 150 × 100 × 65 mm, for alarm systems, UPS units, telecommunications equipment, and other devices requiring a stable power source
Maintenance-free 12 V 2.3 Ah gel battery using AGM technology, with dimensions of 177 x 64 x 35 mm, suitable for alarm systems, UPS units, toys, and other devices requiring a stable power source
Li-Ion 14500 battery with a nominal voltage of 3.7 V and a capacity of 800 mAh. It has overcharge, over discharge, overload and short circuit protection. XTAR ACCU-14500-0.8-2A
everActive R20/D rechargeable batteries with a capacity of 10000 mAh are new-generation cells in Ready To Use technology, intended for intensive use in flashlights, toys and professional devices. They are characterized by high performance, long durability and real capacity confirmed by tests in accordance with the IEC standard.
Rechargeable NiMH AA Battery: 1.2 V, 2200 mAh, 1 cell
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP502030
No product available!
AGM battery with a voltage of 6 V and a capacity of 4.5 Ah, designed to provide stable power supply for devices in backup power systems. AGM technology ensures safety, leak resistance, and the ability to operate in various mounting positions. With its wide range of applications, high reliability, and long service life, it is used in UPS installations, security systems, telecommunications, as well as medical and industrial equipment.
No product available!
Maintenance-free 6 V 1.3 Ah gel battery using AGM technology, measuring 97 x 53 x 24 mm, designed for backup power systems, UPS units, alarm systems, and other applications requiring a stable power source
Li-Po battery 3.7V / 980mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP573450
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP601730
No product available!
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3500mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1850 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP704452
Li-Po battery 3.7V / 750mAh, PCM protection, connector 2 pins, cable length 150mm. Akyga LP403450
This 3.7V 470mAh battery is designed to power compact electronic devices requiring a lightweight and stable power source. Featuring PCM protection and high energy density, it\'s suitable for mobile systems, hobby projects, and professional equipment. AKYGA AKY0100
Li-Po battery with a rated voltage of 3.7 V and a capacity of 110 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP401230
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 2500 mAh. Samsung INR18650-25R
Rechargeable NiMH Battery Pack: 7.2 V, 350 mAh, 3x2 2/3-AAA Cells, JR Connector