.png)
- Out-of-Stock
DDS - 2-channel signal generator
ID: 1184628
Digital signal generator with two output channels. It supports waveform types such as sine wave, rectangular signal, triangular signal, sawtooth signal, ECG and random noise. Fnirsi DDS
Description
A signal generator is an electronic device used to generate different types of signals such as sine waves, rectangles, triangles, sawtooth waves and noise. The device has two output channels and is capable of generating signals with frequencies ranging from 1 Hz to 65534 Hz for channel 1 and High Speed (channel 2) of 1 MHz, 2 MHz, 4 MHz or 8 MHz.
The signal generator offers adjustable signal amplitude and offset via potentiometers, allowing the output signal to be fine-tuned to the user's needs. The unit features an interface consisting of 2 potentiometers and 5 buttons, as well as a 1602 LCD display with backlight. The output impedance of the signal generator ranges from 20 to 200 Ohm, allowing the signal to be matched to different types of loads.
The signal generator is used in many fields such as electronics, telecommunications, scientific research or in testing various devices. It can be used for testing electronic circuits, calibrating measuring instruments and simulating various signals for research purposes.
Features
- Channels: 2
- DDS frequency range (channel 1): 1 Hz to 65534 Hz
- High Speed frequency (channel 2): 1 MHz, 2 MHz, 4 MHz and 8 MHz
- Offset adjustment: potentiometer 0.5pp - 5Vpp
- Amplitude adjustment: potentiometer 0.5Vpp - 14Vpp
- DDS signals:
- Sinusoidal
- Rectangular signal
- Triangular signal
- Ball wave
- Inverse sawtooth wave
- ECG
- Random noise
- Interface: 2 potentiometers and 5 buttons
- LCD display 1602, 2 lines with backlighting
- Frequency adjustment: 1 Hz, 10 Hz, 10 0Hz, 1000 Hz and 10000 Hz
- Output impedance 20 to 200 Ohm
Included
- 2-channel signal generator
- Test lead with BNC connector and crocodile clips
- Charger
- Case
1184628
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
zł53.62
24h
Available quantity: 2
Available
BNC connector adapter cable for mini-grabber clips. Connects to Analog Discovery 2 via a BNC adapter. Digilent 240-136
zł47.97
24h
Available quantity: 2
Available
BNC connector cable (adapter) for minigrabber clips. It enables the connection of the tested system with an oscilloscope
zł12.64
24h
Available quantity: 9
Available
Other products in the same category (16)
Minicomputer equipped with SoC Rockchip RK3399 (ARM Cortex-A72 / ARM Cortex-A53). It has a 4 GB DDR3 RAM memory. The computer has been well-equipped, including Gigabit Ethernet connector, mSATA interface, miniPCIe connector, USB type C, dual CSI interface, etc.
Retired
No product available!
Single high-precision operational amplifier in the SC70-5 housing. STMicroelectronics TSZ121ICT
Retired
No product available!
Dual high-performance operational amplifier in the MiniSO8, 20uV 5V Micro Op Amp 1.8 to 5.5V 400kHz enclosure. STMicroelectronics TSZ122IST
Retired
No product available!
A single comparator with an ultra low current in the SC70-5 housing. STMicroelectronics TS881ICT
Retired
No product available!
A single comparator with a fast response time between the rails in the SOT23-5 housing. STMicroelectronics TS3011ILT
Retired
No product available!
Precision amplifier designed to measure the current on the shunt resistor in the SOT23-5 housing. STMicroelectronics TSC101AIYLT
Retired
No product available!
A double operational amplifier with a large bandwidth in the MiniSO-8 housing. STMicroelectronics TSV912AIYST
Retired
No product available!
TSV612IST, Rail to rail input/output 5V CMOS Op-Amps, micro-power (10uA), GBP=120kHz, dual, Mini SO8
Retired
No product available!
No product available!
TSV631ILT, Rail-to-rail input/output, 60 µA, 880 kHz, 5 V CMOS operational amplifiers, SOT-23-5
Retired
No product available!
No product available!
A small single board computer with a Sitara ™ processor (1 GHz, ARM Cortex-A8), 512 MB DDR3 RAM. It has a built-in 3D accelerator. The board also includes a microSD card slot and a microUSB slot.
Retired
No product available!
TSZ182IYST, Very high accuracy (25 µV) high bandwidth (3 MHz) zero drift 5 V operational amplifiers, Mini SO8
Retired
No product available!
Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM, 8 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.
Retired
No product available!
Orange Pi 3 1GB is a mini-computer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 1GB RAM (LPDDR3), Mali T720 graphics. On the board you can run Android 7.0 and Linux (Ubuntu, Debian).
Retired
No product available!
Orange Pi 3 2GB is a mini-computer equipped with SoC Allwinner H6 (quad core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 2GB RAM (LPDDR3), Mali T720 graphics. On the board you can run Android 7.0 and Linux (Ubuntu, Debian).
Retired
No product available!
Digital signal generator with two output channels. It supports waveform types such as sine wave, rectangular signal, triangular signal, sawtooth signal, ECG and random noise. Fnirsi DDS