- Out-of-Stock
ArduCam camera module with autofocus designed for Raspberry Pi. It was equipped with a matrix (Sony IMX219) with 8 MPix resolution and an integrated IR filter. To connect the camera with Raspberry Pi is implemented using a CSI connector. Autofocus allows sharpening in the range from 4 cm to infinity. ArduCAM B0122
No product available!
No product available!
Switched-mode AC Power supply 12V/2A with DC 5.5x2.1 connector and EU/UK/USA/AUSTRALIA plugs. It has anti-overload, anti-overvoltage, short circuit protection. Conform to the norm Energy efficiency Level VI. Length of output cable is 1.2m
No product available!
No product available!
Needle bending needle, for precise glue application, Flux 0,311mm internal diameter and 1.26mm outside diameter
No product available!
No product available!
Kit for self-assembly of a robotic arm with four degrees of freedom (4DOF). The manipulator is based on servos and is wirelessly controlled
No product available!
Stand-alone debugging and programming mini probe for STM32 microcontrollers with JTAG/SWD interfaces. STMicroelectronics STLINK-V3 MINI
No product available!
PCB board for power amplifier module with LM3886. AVT1922 A
No product available!
No product available!
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
No product available!
C-Mount lens. Focal length 5 mm, FoV 60.3° (H), 47.1° (V) manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN042
No product available!
No product available!
No product available!
HP Motor with 48 CPR Encoder for 25D mm HP Metal Gearmotors (No Gearbox)
No product available!
No product available!