- Out-of-Stock
FriendlyELEC Micro2440 SDK-Board + LCD 3,5'
ID: 185163
Single-board computer with Samsung S3C2440 processor (ARM9) with 3.5 inch LCD and touchpanel
Single-board computer with Samsung S3C2440 processor (ARM9) with 3.5 inch LCD and touchpanel.
Features:
- FriendlyELEC Micro2440 stamp module:
- Dimension: 63 x 52 mm
- CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz)
- RAM: 64 MB SDRAM, 32 bit Bus
- Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS
- Serial, SPI, USB, LCD, CMOS Camera Interface
- Analog Input and Output
- User Outputs: 4x LEDs
- Expansion headers (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
- OS Support
- Windows CE 5 and 6
- Linux 2.6
- Android
- Dimension: 180 x 130 mm
- EEPROM: 1024 Byte (I2C)
- Ext. Memory: SD-Card socket
- Serial Ports: 3x DB9 connector (RS232)
- USB: 4x USB-A Host 1.1, 1x USB-B Device 1.1
- Audio Output: 3.5 mm stereo jack
- Audio Input: 3.5mm jack (mono) + Condenser microphone
- Ethernet: RJ-45 10/100M (DM9000)
- RTC: Real Time Clock with battery (CR1220)
- Beeper: PWM buzzer
- Camera: 20 pin Camera interface (2.0 mm)
- LCD: 41 pin connector for FriendlyELEC Displays and VGA Board
- Touch Panel: 4 pin (resistive)
- User Inputs: 6x push buttons and 1x A/D pot
- Expansion headers (2.0 mm)
- Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
Software and documentation
Software and documentation of FriendlyELEC computers is available at http://www.friendlyarm.net/downloads.
Package contents
- Computer board
- LCD
- JTAG debuger with parallel interface
- Ethernet cable
- USB cable (A/B)
- RS232 cable (DB9F/DB9F)
- Power supply
- DVD-ROM
Download:
185163
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
CAM130 is a 13 MP camera module designed for FriendlyELEC single-board computers. The camera uses the MIPI CSI interface and enables capturing high-resolution images and video in embedded systems, robotics and vision-based applications.
Regular pricezł121.46zł85.10
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with MOSFET RFP30N06LE transistor with N channel. Equipped with two screw connections. For assembly. SparkFun COM-12959
Retired
No product available!
Power supply module with an input voltage from 6 to 12 V and a configurable output voltage of 3.3 V or 5 V. It has holes with a 2.54 mm pitch. Perfect for use with a breadboard. SparkFun PRT-13032
Retired
No product available!
Module with jack connector (TRS) and balanced line transmitter THAT 1646. Offers low distortion and high attenuation. SparkFun BOB-14002
Retired
No product available!
Module with VS1000D chip and SPI Flash memory, which allows you to play sounds in Ogg Vorbix and WAV format stored on a SPI Flash memory. SparkFun DEV-14006
Retired
No product available!
Module with a UV light sensor VEML6070 dedicated to micro:bit. It communicates via the I2C interface. SparkFun SEN-15273
Retired
No product available!
1.26" OLED display with a resolution of 50x16 pixels. 6800, 8080 or SPI interface, has a built-in WS0010 controller. Yellow color. WEG005016ALPP5N00100
Retired
No product available!
Audio expansion module designed for Odroid C2, C1+ and C4 minicomputers. Equipped with a DAC I2S converter and two RCA connectors and a Toslink connector. Hardkernel HiFi Shield 2
Retired
No product available!
Minicomputer with Rockchip RK3399 processor and 4 GB RAM. It is equipped with two Ethernet ports, two USB 3.0 ports, USB Type-C and a microSD slot. Comes with a case. FriendlyELEC NanoPi R4S
Retired
No product available!
Case dedicated to Orange Pi Zero Plus2 H3 and Orange Pi Zero Plus2 H5 computers. Enables the installation of an expansion module. Orange Pi OP0011
Retired
No product available!
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the camera and control the tilt angle. Works with Jetson Nano and Xavier NX. The camera is equipped with an 8MP matrix. ArduCAM B0191PT
Retired
No product available!
2500 mW laser head designed for installation in a CNC machine. It allows you to engrave in materials such as wood, plastics, paper or thin leather. CNClaser2500mW
Retired
No product available!
5 V DC electromagnet with a holding force of 3 kg and a power of 1 W. It can be used to build a DIY electromagnetic lock, smart cabinet or door. DFRobot DFR0794
Retired
No product available!
A LiDAR camera with a small size and a resolution of 2 MP equipped with an IMU unit. It enables very accurate depth detection. Range up to 9 meters. Intel RealSense LiDAR Camera L515
Retired
No product available!
An expansion board (HAT) with a Sipeed module designed to run artificial intelligence (AIoT) in cooperation with a Raspberry Pi. Seeed Studio 102991187
Retired
No product available!
Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Black
Retired
No product available!
Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Blue
Retired
No product available!
Single-board computer with Samsung S3C2440 processor (ARM9) with 3.5 inch LCD and touchpanel