- Out-of-Stock
NGX Technologies mX-LPC11U14-S
ID: 187865
mX-LPC11U14-S
mX-LPC11U14-S
mX-LPC11U14-S is a CORTEX-M0 based stamp board for NGX's mbed-Xpresso Baseboard. The LPC11U14 microcontroller has 32KB of internal flash and 8KB SRAM. The LPC11U14 operate at CPU frequencies of up to 50MHz. In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. Programmable WatchDog Timer (WDT). 1 x UART,1 x I2C-bus interfaces Fast-mode Plus with a data rate of 1 Mbit/s. 1 x SSP controllers, 8-channel 10-bit ADC, Four general purpose counter/timers with a total of four capture inputs and 13 match outputs. Integrated PMU , power on Reset and up to 42 general purpose I/O pins. GPIO pins can be used as edge and level sensitive interrupt sources.
Following are the salient features of the board:
- Dimensions: 126x35 mm2
- Two layer PCB (FR-4 material)
- On-board Test Led
- 12MHz crystal
- On board debugger
- No power supply required, powered through USB
187865
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
Delivery date unknown
No product available!
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 315
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 35
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 15
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.97
Delivery date unknown
No product available!
Other products in the same category (16)
ROSA3D filament made of thermoplastic polyurethane. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ROSA-Flex 96A White
Retired
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 6 mm and a height of 1 mm.
Retired
No product available!
No product available!
No product available!
HK Turnigy Heat Shrink Tube 40mm Red (1mtr) (13834)
Retired
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
Retired
No product available!
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector.
Retired
No product available!
No product available!
No product available!
Audio cable with 3.5 mm 3-pin minijack 2 m length. GEMBIRD CCA-423-2M
Retired
No product available!
No product available!
Laser distance sensor with a measuring range from 0.1 m to 15 m. Communicates via the UART or I2C interface. Waveshare TOF Laser Range Sensor (B)
Retired
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 12 mm and a height of 2 mm.
Retired
No product available!
mX-LPC11U14-S