- Out-of-Stock
chipKIT Pmod Shield Uno (210-229)
ID: 187955
ChipKIT Pmod Shield Uno
chipKIT Pmod Shield Uno
The chipKIT Pmod Shield-Uno is an input/output expansion board for use with the chipKIT Uno32™. It provides the additional circuitry and connectors to allow Digilent peripheral modules (Pmods™) to be used with the Uno32.
The Pmod Shield-Uno has five 2x6 Digilent Pmod connectors. It also provides access to the I/O connectors available on the Uno32 as well as connecting to the I2C bus supported by the Uno32.
The Pmod Shield-Uno has the same form factor as the Uno32 board.
Details
- Usable with the Uno32™
- Gives Uno32 users access to our full line of Pmod™ peripheral modules
- Five 2x6-pin Digilent Pmod connectors
- One 6-pin SPI connector
- One I2C daisy chain connector
Code: 210-229
187955
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 303
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 350
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 116
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 19
Available
Cables for evaluation boards, set of 10 pcs., white colour
zł6.06
24h
Available quantity: 8
Available
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
zł5.68
24h
Available quantity: 221
Available
Other products in the same category (16)
Lithium Polymer rechargeable cell with a Protection circuit. Compatible with ODROID-C0
Retired
No product available!
MYIR MYC-JA5D44 is a single-board computer in the form of a card with SO-DIMM 200-pin connector. The SAMA5D44 processor from Atmel, based on Cortex-A5 cores, has been equipped. It can work with a maximum frequency of 600 MHz. It has 512 MB of DDR2 SDRAM, 512 MB of NAND Flash memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector.
Retired
No product available!
MYIR MYC-C7Z020 is a single board computer module based on the MYC-C7Z020 chip. This system consists of a dual-core processor based on the Cortex-A9 core (667 MHz) and the Artix-7 FPGA chip. The board has 1 GB of DDR3 SDRAM, 4 GB of eMMC memory and 32 MB of QSPI Flash memory. The board is equipped with numerous peripherals, the outputs of which have been led out on two 140-pin connectors.
Retired
No product available!
UART GPS Module, NEO-7M-C onboard, straight/vertical pinheader
Retired
No product available!
The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get. A000133
Retired
No product available!
Printed circuit board with programmed layout for a dual-function acoustic switch. AVT3144 A +
Retired
No product available!
Programmed layout for a dual-function acoustic switch. AVT3144 UK
Retired
No product available!
A set for self-assembly of a dual-function sound switch. AVT3144 B
Retired
No product available!
Printed circuit board and programmed clock system with a 20mm display set by means of GPS. AVT5522 / 1 A +
Retired
No product available!
AVT kit for self-assembly of an accurate clock with a 20mm display set by means of GPS. AVT5522 / 1 B
Retired
No product available!
Assembled, accurate clock with 20mm display set by means of GPS. AVT5522 / 1 C
Retired
No product available!
Printed circuit board and programmed clock system with a 55mm display set by means of GPS. AVT5522 / 2 A +
Retired
No product available!
AVT set for self-assembly of the clock with a 55mm display set by means of GPS. AVT552 / 2 B
Retired
No product available!
Assembled clock with 55mm display set by means of GPS. AVT5522 / 2 C
Retired
No product available!
A set of PCB boards and a programmed layout for building a simple led clock. AVT3132 A +
Retired
No product available!
AVT kit for self-assembly of a simple LED clock with a blue display. AVT3132 B
Retired
No product available!
ChipKIT Pmod Shield Uno