- Out-of-Stock
AVT5158 A +
ID: 190072
GRAPHIC CORRECTOR FOR AUDIO KIT - PLATEBOARD AND CONTROLLED LAYOUT
GRAPHIC CORRECTOR FOR AUDIO KIT - PLATEBOARD AND CONTROLLED LAYOUT
Producer: AVT
Graphic equalizers were one of the more popular elements of audio sets in the 80s -90s of the last century. These devices allow to change the characteristics of the audio track so that it is possible to 'fit' the shape of the room and the listening room, its furnishings and, above all, the preferences of the listener.
Kit allows you to make a device that is on the edge of digital and analogue technology. The main element shaping the audio waveforms is a merged, 5-point graphic equalizer with digitally controlled I2C bus. It allows you to shape waveforms, incorporates a precise 48-point attenuator and all this with very low distortion and own noise. The entirety of the graphic equalizer is controlled by the microcontroller from the ATmega series
The device is especially recommended for audiophiles - electronics and not only
Selected parameters:
- adjustment band: 32Hz, 64Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16kHz
- regulation in individual bands in the range +/- 14dB
- volume adjustment 0 to -17.625dB
- harmonic distortion 0.01%
- 90dB channel separation
- S / N 100dB
- 2.5Vrms max input signal
- predefined settings: Rock, Pop, Jazz, Techno, Metal, Classic, Acoustic, Eq off
- 8 user settings memory
- built-in graphic LCD display
- power supply - 7 - 9Vac
- a printed circuit board, programmed layout and documentation in the set
A version with a set of components for self-assembly is available- Detailed description in
Download
190072
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
Infrared sensor that allows measurement of distances up to 15cm, has a built-in infrared illuminator, IR receiver and a perimeter of the received signal
Retired
No product available!
Miniature (22x13.5x6mm) WiFi module b / g / n with TCP and UDP protocols operating in standalone and access point modes. 2.0mm goldpin connector. The module is equipped with a UART interface, it is also possible to control GPIO lines (also as PWM). Powered by 3.3V. Antenna: copper wire
Retired
No product available!
Ultra miniature WiFi b/g/n module, equipped with UART, SPI, PWM and GPIO interfaces. The ability to work as an access point and in standalone mode. 3.3V power supply.HF-LPT200-1
Retired
No product available!
This transducer is about 45mm in diameter and has 4Ω impedance and should be run at about 5W
Retired
No product available!
SPIRIT1 868 MHz low power RF module with integrated microcontroller
Delivery date unknown
No product available!
Read/Write analog front end for 125 kHz RFID Basestation, SOIC16, EM Microrlectronic, RoHS
Retired
No product available!
Bitscope Micro is a miniature measuring instrument with a USB interface, it can act as an 8-channel logic analyzer (40MS / s, 3.3V or 5V) or a 2-channel oscilloscope (bandwidth up to 20MHz). In addition, Bitscope can generate a clock signal as well as sinusoidal, triangular, rectangular and saws
Retired
No product available!
High performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network
Retired
No product available!
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 3124
Retired
No product available!
Expansion module kit with Arduino compatible connectors for building a Zumo robot. The module includes a dual engine controller, buzzer and user button, as well as a 3-axis accelerometer and compass. Pololu 2508
Retired
No product available!
Bi-directional converter enabling communication of any device equipped with an RS232 serial port with 802.11 b / g / n wireless WiFi network. The module can work as a TCP client / TCP or UDP server. The layout is "transparent" for communicating systems, which does not doubt facilitate communication between them.
Retired
No product available!
1m USB A-microB USB cable, white-blue cable, flat pink RGB LED illuminated plugs
Retired
No product available!
The module is used to build prototypes and designs based on the popular ATmega8 microcontroller. It is possible to mount another microcontroller from the AVR family, if only pin outs coincide with ATmega8. MOD-01.Z
Retired
No product available!
No product available!
Module with a relay with a permissible maximum current of 10A with a 5V coil (MOD-03.Z). The module has a transistor relay control transistor and an overvoltage / self-inductive diode from the coil.
Retired
No product available!
GRAPHIC CORRECTOR FOR AUDIO KIT - PLATEBOARD AND CONTROLLED LAYOUT