- Out-of-Stock
NWT7 A - Circuit analyzer nwt7 - printed circuit board
ID: 190343
NWT7 CIRCUIT ANALYZER - PRINTED PLATE
Description
NWT7 CIRCUIT ANALYZER - PRINTED PLATE
Circuit analyzers have become universal measuring instruments in the laboratories of constructors of radio engineering devices, and thanks to the progress of technology, they slowly enter the home radio amateur workshops. The device consists of several main parts: an RF signal generator, measuring detectors and a microcontroller controlling their operation. The output signal is given to the input of the tested system and the signal received at its output measured by means of detectors with logarithmic or linear characteristics. The generator operates in sweep mode in the range selected by the user or on any fixed frequency in the range of 100kHz-60MHz. The results of measurements are sent to a PC and analyzed there.
The device is especially recommended to all elektronikom-radioamatorom /
properties
- RF signal in the range of 100kHz-60MHz
- Tuning step - any above 1Hz
- Output power <10dBm (0.7V / 50om)
- Logarithmic detector - 100kHz-500MHz band
- Maximum input power + 15dBm (1.2V)
- Dynamic range 80dB
- Line detector - 100kHz-500MHz band
- Maximum input power + 9dBm (660mV)
- Dynamic range approx. 30dB
- Computer interface in the RS232 standard
- Cooperation with Win 95,2000, XP and DOS (limited)
- Additional functions - RF generator, VFO, spectrum analysis in the RF field
- Power - 12-15 Vdc
- printed circuit board and documentation included
The exact description is in IS 10-11 / 07
190343
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Male terminal block, angled, 7-pin. Pitch 5.0mm. Height 7.8mm. 2EDGRC-5.0-7P
Retired
No product available!
Male terminal block, angled, 8-pin. Pitch 5.0mm. Height 7.8mm. 2EDGRC-5.0-8P
Retired
No product available!
Male terminal block, angled, 9-pin. Pitch 5.0mm. Height 7.8mm. 2EDGRC-5.0-9P
Retired
No product available!
Male terminal block, angled, 10-pin. Pitch 5.0mm. Height 7.8mm. 2EDGRC-5.0-10P
Retired
No product available!
Male terminal block, angled, 11-pin. Pitch 5.0mm. Height 7.8mm. 2EDGRC-5.0-11P
Retired
No product available!
Male terminal block, angled, 12-pin. Pitch 5.0mm. Height 7.8mm. 2EDGRC-5.0-12P
Retired
No product available!
Female terminal block, 2-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-2P
Retired
No product available!
Female terminal block, 3-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-3P
Retired
No product available!
Female terminal block, 4-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-4P
Retired
No product available!
Female terminal block, angled, 2-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-2P
Retired
No product available!
Female terminal block, angled, 3-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-3P
Retired
No product available!
Female terminal block, 2-pin. Pitch 5.0mm. Height 15mm. Suitable for 2EDGRC male strips with a pitch of 5.0 mm. 2EDGKN-5.00
Retired
No product available!
A minicomputer with a Rockchip RK3399 processor and 4GB of RAM and 32GB of eMMC memory. It features two Ethernet ports, two USB 3.0 ports, USB Type C and a microSD slot. The case includes. FriendlyELEC NanoPi R4SE
Retired
No product available!
Camera module with Sony Starvis IMX327 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a motorized IR-CUT filter. ArduCAM B0425
Retired
No product available!
Camera module with Sony Starvis IMX462 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a movable IR-CUT filter. ArduCAM B0423
Retired
No product available!
5-channel SATA expander equipped with M.2 B Key connector. It supports HDD and SSD drives that work with the SATA protocol. Waveshare M2-SATA-5P
Retired
No product available!
NWT7 CIRCUIT ANALYZER - PRINTED PLATE