- Out-of-Stock
UNUSUAL ELECTRONIC LOCKER - SELF-ASSEMBLY KIT
The device can be used as an unusual electronic lock. It is also an educational toy and an example of an interesting work principle. Of course, the lock can work with different types of actuators.
To open the lock, put in a slot located, for example, on the door of a protected room, a special key - a tiny plate with two contacts - pins, and then press the button. The system will check if the elements set in the key are correctly selected and will unlock the executive system. The pattern is a combination of two resistors and a capacitor, and a chance to make a simple electronic way of 'pick-up' - a small one. This is due to the analog character of the lock's work.
The device is especially recommended to everyone who wants to protect and monitor
Selected parameters:
Download
Manufacturer
Responsible person
Development kit with ESP32 module and LoRa communication. It is equipped with an integrated ESP32-C3 chip with a 32-bit RISC-V core processor and a Wio-E5 STM32WLE5JC module as a long-range controller that supports the LoRa protocol. Seeed Studio 114992985
No product available!
USB-TTL converter with USB type A, micro USB and USB type C connectors. Enables communication between the UART serial interface and the USB interface. SB Components 24780
No product available!
Kit with NVIDIA Jetson Xavier NX module (with NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics). It has LPDDR4 8GB RAM memory, Ethernet interface, HDMI and MIPI-CSI camera connectors. A 128GB SSD is included. Auvidea JNX30D-NX8-128GB
No product available!
The 7-color ACeP e-Paper display has a diagonal of 7.3" and a resolution of 800x480 px. Communicates via SPI interface. No PCB. Waveshare 7.3inch e-Paper (F)
No product available!
ACeP e-Paper 7-color display module with 7.3" diagonal and 800x480 px resolution. It communicates via SPI interface. Waveshare 7.3inch e-Paper HAT (F)
No product available!
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Candy
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Flower
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Frozen
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Jungle
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Moon
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Multicolor Silk Pacific
No product available!
Filament from ROSA3D made of high-quality ABS pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill ABS+ Black
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Black
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Blue
No product available!
UNUSUAL ELECTRONIC LOCKER - SELF-ASSEMBLY KIT