.png)
- Out-of-Stock
AVT1477 A
ID: 190686
WORKSHOP POWER SUPPLY - PCB PLATE
WORKSHOP POWER SUPPLY - PCB PLATE
Producer: AVT
To power simple electronic circuits in a home laboratory, you do not need extensive power supplies. The system will certainly meet the requirements of many electronics. The power supply is actually four identical voltage stabilizers. Three-terminal LM317 type circuits were used, whose maximum current efficiency is 1.5A (each). LMs have internal protection against overheating, short-circuit and overload are therefore ideal for such applications. Of course, they do not require any adjustment or tuning - the system is immediately ready for use after assembly.
The device is particularly recommended in the construction workshop, service or as part of a larger device
Selected parameters:
- four independent (common mass) power supplies with voltage regulation
- positive output voltage 4 x (1.25-24Vdc)
- smooth voltage regulation in each of the power supplies
- maximum output current of each 1.5A power supply unit (with heatsink)
- power supply - 25-35Vdc
- dimensions of the 100x39mm board
- printed circuit board and documentation included
A version with a set of components for self-assembly is available
- Detailed description in
Download
190686
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
2D lidar sensor based on DTOF technology with measuring range up to 50 m (90% reflectivity), sampling rate 32000 samples/s, angular resolution 0.12°, UART 1 Mbps interface, IP65 protection rating, 5 V supply voltage. Slamtec RPLIDAR S2P
Retired
No product available!
2D lidar using DTOF technology with a range of up to 18 m (90% reflectivity), 32,000 samples/s sampling rate, 0.12° angular resolution, UART 1 Mbps interface, IP65 protection rating, 5 V supply. Slamtec RPLIDAR S2L
Retired
No product available!
2D DTOF Lidar with a range of up to 30 m (90% reflectivity), 32000 measurements/s, 0.12° angular resolution, Ethernet UDP 10/100M communication, IP65 protection rating, 12 V supply voltage. Slamtec RPLIDAR S2E
Retired
No product available!
USB2.0 starlight camera module with an SC2210 sensor and 2 MPX resolution, equipped with an M12 lens with F1.0 aperture, designed for low-light image capture and integration with Windows, Linux, and macOS systems. Waveshare SC2210 2MP USB Camera (A)
Retired
No product available!
Robotics development kit based on the RDK S100 SoC with CPU + BPU + MCU architecture, 128 TOPS (INT8) AI performance, 6x Cortex-A78AE 2.0 GHz, 4x Cortex-R52+, 24 GB LPDDR5, 2x Gigabit Ethernet, 4x USB 3.0, HDMI, 12 - 20 V DC input. D-Robotics RDK S100P
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 110mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0474
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 150mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0153
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 190mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0477
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 250mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0106
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 250mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0384
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 300mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0657
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 400mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0386
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 450mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0486
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0392
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0559
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 850mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0108
Retired
No product available!
WORKSHOP POWER SUPPLY - PCB PLATE