- Out-of-Stock
AVT1457 A
ID: 193361
HALOGEN LIGHTING REGULATOR - PRINTED PLATE
HALOGEN LIGHTING REGULATOR - PRINTED PLATE
Producer: AVT
The set enables fluent regulation of the intensity of the electric lighting. Switching control and brightness level is done with a single button. The control element is a specialized integrated circuit, which is equipped with special procedures for switching on a cold bulb (when the resistance of the filament is the smallest) and in this way the light source is protected against damage.
Dimmer has three basic modes of operation, their selection is determined by the position of the jumper.
The device is especially recommended for all home users of halogen lighting
Selected parameters:
- executive element - triac
- possibility of controlling halogen bulbs powered from 230V or 12V
- controlling the dimmer operation - a single button
- three operating modes (operating modes of the control button)
- mode selection - jumper
- power supply - 230Vac
- printed circuit board and documentation included
Detailed description in EP 10/07
Download
193361
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
FPF1048BUCX, Power Switch ICs - Power Distribution IntelliMAX Slew Rate Controlled Load Switch, WLCSP-6
Retired
No product available!
A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 2.4 A. eXtreme ATCCU24B
Retired
No product available!
A mains charger with a USB socket and a built-in type-C USB cable. The maximum current generated by the charger is 3.1 A. eXtreme NTC31CU
Retired
No product available!
WIFI-LPT100-B is a small module that enables communication using a wireless WiFi network. It has a UART interface, and is characterized by low energy consumption.
Retired
No product available!
5 megapixel camera module compatible with Coral Dev Board. Connects via the MIPI-CSI interface. Coral Camera
Retired
No product available!
Evaluation kit with i.MX 8M Mini Quad processor. It consists of a motherboard and a plate with an application processor plugged into the motherboard. The set has a WiFi module and Bluetooth 4.1 and a built-in chip antenna, connectors for display, audio and USB 3.0. NXP 8MMINILPD4-EVK
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Android
Retired
No product available!
EMMC Flash memory module for Hardkernel Odroid N2 computers. 8 GB capacity, installed Linux operating system. The set includes a microSD adapter. Hardkernel 8GB eMMC Module N2 Linux
Retired
No product available!
No product available!
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Retired
No product available!
BGA balls with a diameter of 0.35 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
BGA balls with a diameter of 0.3 mm and composition Sn63 / Pb37. The ampoule contains 10,000 pieces.
Retired
No product available!
Speaker cable, two-core with a cross section of 1 mm2, black and red, PVC insulation. Price per meter. TASKER TSK53
Retired
No product available!
Speaker cable, two-core, 0.75 mm2 cross section, black and red, PVC insulation. Price per meter. TASKER TSK52
Retired
No product available!
Tin Sn60Pb40 with flux (100 g spool), diameter 0.38 mm. Cynel LC60-0.38/100
Retired
No product available!
E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591
Retired
No product available!
HALOGEN LIGHTING REGULATOR - PRINTED PLATE