- Out-of-Stock
AVT2004 B
ID: 193634
WOLTOMIERZ TO MODULAR MEASURING SET - SELF-MOUNTING KIT
WOLTOMIERZ TO MODULAR MEASURING SET - SELF-MOUNTING KIT
Availability: While stocks last
Milivoltmeter with LED display is designed for a modular measurement set. The size and shape and, above all, the parameters make it suitable for incorporation in other devices, wherever there is a need for a digital, accurate voltage reading.
The kit uses the popular, ICL7107 integrated AC converter. The system directly controls seven-segment LED displays. They allow reading the measured value in the form of 3.5 digits. The polarization mark is also presented.
In the basic version, the module can work as a voltmeter with the range of 200 mV or 2 V.
The device is particularly recommended for designers of measuring equipment, wherever the measurement result must be clearly visible and in electronic laboratories
Selected voltmeter parameters:
- measuring range - 200 mV or 2 V
- input resistance> 10 Mom
- accuracy of the result - +/- 1 in the last position
- reading field - 3.5 digits
- signaling of exceeding the measuring range
- measuring cycle - approx. 0.3 s
- power supply - 5 V
- in the set a printed circuit board, a set of elements and documentation
- Detailed description in
- and
Download
193634
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Orange Pi 3 2GB for minicomputer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 2 GB of RAM (LPDDR3), a Mali T720 graphics chip, 8 GB of eMMC memory. The board can run Android 7.0 and Linux.
Retired
No product available!
A minisumo robot on a tracked chassis with Pololu 50:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3125
Retired
No product available!
Pre-installed Android5.x or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
Retired
No product available!
Male terminal block, angled, 14-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
Retired
No product available!
Particle Photon is an IoT module with an ARM microcontroller (Cortex-M3) and a WiFi module. The module has a 2.54 mm goldpin connector. WRL-13774
Retired
No product available!
Modular USB and HDMI expander dedicated to the Raspberry Pi Zero and Zero 2W. It consists of three parts and has contact holes for easy integration with other POD modules. Waveshare Zero POD HDMI USB Hub Module
Retired
No product available!
Premium Jumper Wire 50-Piece Rainbow Assortment M-M 12"
Retired
No product available!
The fun with marble runs continues with Ugears\' Marble Run Tiered Hoist, the third in a series of Ugears modular marble runs. This unique entrant in our growing collection of entertaining wooden marble runs features a 3-tiered stair lift that raises the marbles to the top for amusement park adventures. This wooden DIY kit is both a 3D puzzle and a fun toy. The Marble Run Tiered Hoist features a fascinating lift, three new track elements, and interesting trap and release mechanisms sprinkled throughout. Turn the hand crank and watch the marbles make their journeys through various obstacles down to the collection tray below. Multiple tracks and elements are packed into a compact space in this well-designed DIY marble run. UGears 70170
Retired
No product available!
Nylon Spacer: 12mm Length, 5mm OD, 3.3mm ID (25-Pack)
Retired
No product available!
Matrix display module with a Raspberry Pi Pico W control board. It has built-in 1024 RGB LEDs in a 32x32 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM670
Retired
No product available!
No product available!
Retired
No product available!
No product available!
Set with a measuring module and a probe for measuring electrical conductivity. It allows you to measure the salinity of water and soil. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020292
Retired
No product available!
No product available!
The Multi-Touch Display Shield is a gorgeous 2.8“ touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger multi-touch support. Digilent 410-317
Retired
No product available!
WOLTOMIERZ TO MODULAR MEASURING SET - SELF-MOUNTING KIT