- Out-of-Stock
AVT2757 A
ID: 193783
MICROPROCESSOR POWER SUPPLY 0-25,5 V 0-2.5 A - PRINTED PLATE
MICROPROCESSOR POWER SUPPLY 0-25,5 V 0-2.5 A - PRINTED PLATE
Producer: AVT
The power supply is characterized by high functionality. The device allows a smooth change of the output voltage and current limit. All adjustments are made on the analogue path, using potentiometers. For users of microprocessor systems, it is possible to connect an additional control module to the power supply (it is not included in the kit) - then all settings are obtained on the digital path.
The system was designed based on popular, cheap and easily accessible elements. As a result, the power supply represents high parameters, easy assembly and low cost of execution.
The device is especially recommended in laboratories of amateur electronics and service
Selected parameters:
- output voltage: 0-25.5 V
- voltage setting with a step of 10 mV
- current limit: 10 mA - 2.55 A
- setting the current limit with a 10 mA step
- parameter adjustment - analog
- the ability to connect the control processor
- operation status indication - LED
- power supply - 2 x 12 V AC
- printed circuit board and documentation included
- Detailed description in EdW 7/05
Download
193783
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
The module enables connection of two devices with I2C interface working with different voltage levels. MOD-28.Z
Retired
No product available!
It is used to monitor the temperature measurement and other parameters. The expansion module has an I2C / 1-Wire converter (DS2482) through which DS18B20 temperature sensors can be connected using two or three wires. MOD-29.Z
Retired
No product available!
Power module with IRFR4105Z transistor (MOD-30.Z), maximum current 2A, 5V power supply or 5V - 12V range (selection by jumper)
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
Universal module with LM358 operational amplifier. Depending on the additional elements installed, the amplifier can be freely configured, eg as a reversing, non-inverting amplifier, voltage follower or an integrating amplifier. MOD-32.Z
Retired
No product available!
No product available!
The modally controlled modulation module MOD-34 / BZ allows wireless load control with a current consumption of up to 10A via a relay. Includes wireless module nRF24l01.
Retired
No product available!
No product available!
No product available!
No product available!
The module with the TXB0108 system enables the connection of systems operating with different voltage levels. It has 8-channels and is 2-way. The transmission direction of each channel is detected automatically. MOD-38.Z
Retired
No product available!
No product available!
The STM32 eXploreM0 module contains a 32-bit microcontroller with ARM Cortex M0 core, STM32F051C8T6 (64 kB Flash memory, 8 kB RAM, 48 MHz, HDMI-CEC, I2C, IrDA, LIN, SPI, UART / USART). The USB / UART converter allows programming of the microcontroller via a USB cable. MOD-40.Z
Retired
No product available!
The STM32 eXploreM0 + module contains a 32-bit microcontroller with ARM Cortex M0 + core, STM32L051C8T6 (64 kB of Flash memory, 8 kB RAM, 32 MHz, I2C, IrDA, SPI, UART / USART). The built-in USB / UART converter enables programming of the microcontroller via a USB cable. MOD-41.Z
Retired
No product available!
No product available!
MICROPROCESSOR POWER SUPPLY 0-25,5 V 0-2.5 A - PRINTED PLATE