AVT5002 A

Practical electronics 07/2017

MYS-6ULX-IND is a small single board computer (SBC - Single Board Computer) designed specifically for use in Industry 4.0. It has a built-in NXP MCIMX6G2CVM05A processor based on the Cortex A7 core, which can operate at a maximum frequency of 696 MHz

MYS-6ULX-IOT is a small single board computer (SBC) dedicated to Internet of Things projects. It has a built-in NXP MCIMX6Y2DVM05A processor based on the Cortex A7 core. It can work at a maximum frequency of 528 MHz. MYIR MYS-6ULX-IOT

USB A 2.0 / USB C cable silicone, 1 m, black

USB A 2.0 / USB C cable silicone, 1 m, white

Cloudshell 2 Smoky blue with 15V/4A PSU

Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254

Operational amplifier; 1,2MHz; 1.8 ... 6VDC; 2 channels; SOP8; Microchip, RoHS

This sensor shield utilizes the BME280 pressure/humidity/temperature sensor, the CCS811 air quality sensor and the APDS-9301 ambient light sensor - using each corresponding Arduino library. The shield has been equipped with two RJ11 connectors for wind and rain detection and measurement, as well as optional pins for external temperature readings and soil moisture sensor. DEV-14153

Pmod MTDS is a module with a 2.8-inch LCD display. It has a resolution of 320x240 pixels. It has touch support (capacitive, 2 point). Digilent 410-341

Pmod SSR is a module with a semiconductor relay. One GPIO port is required for control, the relay is suitable for operation with up to 48 V, it can be used for devices that draw current up to 6 A. Digilent 410-342

SparkFun Inventor’s Kit is a great way to get started with programming and hardware interaction with the Arduino programming language. The kit includes everything you need to complete 16 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don’t need any previous programming or electronics experience to use this kit. KIT-13970

RoboClaw 2x60A Motor Controller (V6) is a two-channel DC motor driver, operating voltage: 6-34V, maximum continuous current: 60A, easy implementation of feedback loops with PID controller, safety systems. Pololu 3289

Development kit with STM32F103R8T6 microcontroller and 2.8 "TFT display with touch panel.

Gold-plated HDMI (M) - HDMI (M) cable with a length of 1.5 m, Ultra Slim, RoHS

HDMI (M) to DVI-D (M) cable with a length of 2 m.