.png)
- Out-of-Stock
AVT2924 UK
ID: 193999
MICROPROCESSOR POWER METER AND FITTING - PROGRAMMED SYSTEM
MICROPROCESSOR POWER METER AND FITTING - PROGRAMMED SYSTEM
Producer: AVT
One of the most difficult tasks in radioamateur practice is the measurement of power. There are a number of solutions to this problem, starting with diode detectors, through thermal detectors on specialized integrated circuits. Each solution has its advantages and disadvantages, eg: diode detectors are characterized by high frequency of work reaching tens of GHz, simplicity of application, but their disadvantages include low linearity range, maximum 30dB (without special circuits compensating for non-linearity of diode characteristics) and sensitivity on the shape of the measured waveform. The applied AD8362 power detector circuitry is distinguished by its maximum operating frequency range of 3.5GHz and dynamics up to 60dB. The voltage increase at the output is 50mV per dB. The system works correctly in the range from 1MHz to 750MHz, the parasitic resonances of the applied elements and the asymmetrical configuration of the input are responsible for limiting the band.
Programmed layout
Detailed description EdW 12/09
193999
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
Development kit with ESP32 WiFi and Bluetooth module and 1.54 "ePaper display. Built-in IMU MPU6050 sensor and USB-UART converter. LilyGO TTGO T-Block ESP32
Retired
No product available!
Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip, dedicated to the T-Wristband
Retired
No product available!
Programmable watch with ESP32-Pico-D4. Equipped with a touch button display, motion sensor, power management system, RTC clock and Lithium battery. LILYGO TTGO T-Wristband
Retired
No product available!
Wrist strap for LilyGo TTGO t-wristband module. Black colour
Retired
No product available!
Solar panel with an output voltage of 6 V and a power of 1 W. Provides high efficiency and work stability
Retired
No product available!
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
Retired
No product available!
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
Retired
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
Retired
No product available!
Set of 4 mounting plates for Raspberry Pi 4B compatible with 19-inch 3U rack mount. The holder shown in the 3rd picture is not included in the set and must be purchased separately. ArduCAM U6131
Retired
No product available!
Camera module with IMX477 HQ sensor designed for Raspberry Pi Compute Module (CM3, CM3 +, CM4). Equipped with 1/2.3″ lens with M12 mount and 75° viewing angle. ArduCAM B0271
Retired
No product available!
Camera with a USB interface with a resolution of 8 MP. Equipped with a Sony CMOS IMX179 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM UB0229
Retired
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. ArduCAM B0225
Retired
No product available!
2 MPx camera module with OV2311 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount. ArduCAM B0219
Retired
No product available!
The camera set with the IMX219 8 MPx sensor allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B8
Retired
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. ArduCAM B0199
Retired
No product available!
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 75°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0188
Retired
No product available!
MICROPROCESSOR POWER METER AND FITTING - PROGRAMMED SYSTEM