.png)
- Out-of-Stock
AVT559 UK
ID: 194082
RADIO PILOT EXTENSION - CONTROLLED SYSTEM
RADIO PILOT EXTENSION - CONTROLLED SYSTEM
Producer: AVT
The device is intended for particularly comfortable users of satellite equipment. Kit allows you to remotely change settings from another room, without the need to prepare a cable or direct infrared connection. The set consists of two plates containing a remote control signal transmitter / receiver. The first drive decodes the infrared signals from the remote control and converts them to the satellite tuner control codes. Information obtained this way is sent via radio to the receiver. After verifying the correctness of the transmission (in the second repeater), the code is emitted by an infrared transmitter.
The device is especially recommended for people with all day long work and everywhere where the convenience of using audio / video equipment is treated as superior
Selected parameters:
- the possibility of using any remote control operating in the RC5 standard
- radio data transmission on the 433.92 MHz frequency
- software regeneration of pulses on the side of the radio receiver
- checking the correctness of data sent via radio channel
- visualization of the work of systems
- power supply - 5 V
- programmed circuits (transmitter / receiver)
- Detailed description in
Download
194082
Manufacturer
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Responsible person
- AVT SPV Sp. z o.o.
- Leszczynowa 11
- 03-197 Warszawa
- Poland
- [email protected]
Other products in the same category (16)
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare Pico-ePaper-2.7
Retired
No product available!
A set for building a minicomputer based on Raspberry Pi CM4. It consists of a metal case with a fan, a power supply and a Mini Base Board (B) and a USB HDMI to FCC adapter. Waveshare CM4-IO-BASE-Acce D
Retired
No product available!
The Uni-T non-contact thermometer is designed to measure the temperature of the human body. It allows you to measure the temperature in a non-invasive way in the range from 32°C to 42.9°C from a distance of 5 to 10 cm. Uni-T UT300H
Retired
No product available!
Kit with 16 modules and the IO Expansion Shield designed to work with the Arduino Uno. Dedicated to learning programming and electronics
Retired
No product available!
Development kit with ESP32 WiFi and Bluetooth module and 1.54 "ePaper display. Built-in IMU MPU6050 sensor and USB-UART converter. LilyGO TTGO T-Block ESP32
Retired
No product available!
Module with a pulse sensor and the level of SpO2 (oxygen saturation level). It is based on the MAX30102 chip, dedicated to the T-Wristband
Retired
No product available!
Programmable watch with ESP32-Pico-D4. Equipped with a touch button display, motion sensor, power management system, RTC clock and Lithium battery. LILYGO TTGO T-Wristband
Retired
No product available!
Wrist strap for LilyGo TTGO t-wristband module. Black colour
Retired
No product available!
Solar panel with an output voltage of 6 V and a power of 1 W. Provides high efficiency and work stability
Retired
No product available!
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
Retired
No product available!
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
Retired
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
Retired
No product available!
Set of 4 mounting plates for Raspberry Pi 4B compatible with 19-inch 3U rack mount. The holder shown in the 3rd picture is not included in the set and must be purchased separately. ArduCAM U6131
Retired
No product available!
Camera module with IMX477 HQ sensor designed for Raspberry Pi Compute Module (CM3, CM3 +, CM4). Equipped with 1/2.3″ lens with M12 mount and 75° viewing angle. ArduCAM B0271
Retired
No product available!
Camera with a USB interface with a resolution of 8 MP. Equipped with a Sony CMOS IMX179 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM UB0229
Retired
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. ArduCAM B0225
Retired
No product available!
RADIO PILOT EXTENSION - CONTROLLED SYSTEM