- Out-of-Stock
AVT517 UK
ID: 194084
RADIO REMOTE CONTROLLING SYSTEM WITH A REVERSIBLE CHANNEL - PROGRAMMED SYSTEM
RADIO REMOTE CONTROLLING SYSTEM WITH A REVERSIBLE CHANNEL - PROGRAMMED SYSTEM
Producer: AVT
The system includes a transmitter and a receiver. This allows you to control two servos and two ON / OFF outputs. An interesting option is to work with the return channel (transferring data from the receiver to the transmitter). The device is easy to assemble. The CC1000PP radio modules based on the Chipcon chipset were used as a radio part. The use of a ready-made radio track radically simplified (and in principle eliminated) the tuning process. The modules enable bidirectional data transmission. Thanks to this, it is possible to prepare a channel allowing the operator to follow the changes appearing in the receiving part. The transmitter has two types of keypads. Potentiometers are used to control the servos. The ON / OFF channels are controlled by traditional switches. At the output of the receiver there are connectors for connecting typical servos and OC type outputs for controlling eg relays.
The device is especially recommended for two-way data transmission, in modeling and in local telemetric systems
Selected parameters:
- radio part - ready radiomodems CC1000PP
- frequency of the connection - 433 MHz
- power 10 mW, digital coding
- two analog channels + two ON / OFF channels
- return channel ON / OFF
- control of the power supply voltage of the transmitter and receiver
- sound signaling
- power supply - 4.5-9 V (transmitter / receiver)
- 2 programmed circuits (transmitter + receiver)
- A detailed description in EP 7/03
Download
194084
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
AVT kit for self-assembly of the battery capacity meter and the level of battery consumption. AVT5500 B
Retired
No product available!
433M wireless module for SPI interface, vertical pinheaders, 1.27mm pitch
Retired
No product available!
high performance e-compass, 3D accelerometer and 3D magnetometer module, I2C interface, LSM303DLHC on board
Retired
No product available!
three-axis digital output gyroscope, three-axis angular rate sensor module, I2C/SPI interface, L3G4200D on board
Retired
No product available!
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
Retired
No product available!
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
Retired
No product available!
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
Retired
No product available!
Raspberry computer case: Pi 3 model B +, Pi 3 model B, Pi 2 model B and Pi 1 model B + in gray with metal
Retired
No product available!
Battery: Li-Ion; 3.7V; 1000mAh; Outputs: wires with 2-pin JST-PH connector; 50.8 mm x 33.5 x 5.9 mm. PRT-13813
Retired
No product available!
No product available!
This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/16-step).
Retired
No product available!
Wheels fit 2 mm diameter output shafts such as the ones on our sub-micro plastic planetary gearmotors. Pololu - 2356
Retired
No product available!
JEKEN CE-6200A ultrasonic cleaner, with digitally adjustable working time, power 70 W and a capacity of 1.4 l. It is well suited for repair and maintenance of electronic components, PCBs, optical elements, as well as for the dissolution of polymers
Retired
No product available!
Rick Waldron, Anna Gerber, David Resseguie, Emily Rose, Susan Hinton, Sara Gorecki, Bryan Hughes, Andrew Fisher, Julian David Duque, Pawel Szymczykowski, Donovan Buck, Jonathan Beri, Kassandra Perch, Raquel Vélez, Lyza Danger Gardner
Retired
No product available!
The grapple is used for precise operations when replacing SMD and BGA circuits. It allows you to lift small electronic components without using tweezers
Retired
No product available!
Spray CLEANSER PCC 15 with a capacity of 150ml, with a brush is a reliable solution for cleaning printed circuit boards and soldering residues. MICROCHIP
Retired
No product available!
RADIO REMOTE CONTROLLING SYSTEM WITH A REVERSIBLE CHANNEL - PROGRAMMED SYSTEM