- Out-of-Stock
These 2×3-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
These housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings (note: it’s not easy to get the wires back out, so plan carefully!).
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other; you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy:
|
|
![]() |
![]() |
| Pins | A (mm) | B (mm) |
|---|---|---|
| 1×1 | – | 2.54 |
| 1×2 | 2.54 | 5.08 |
| 1×3 | 5.08 | 7.62 |
| 1×4 | 7.62 | 10.16 |
| 1×5 | 10.16 | 12.70 |
| 1×6 | 12.70 | 15.24 |
| 1×7 | 15.24 | 17.78 |
| 1×8 | 17.78 | 20.32 |
| 1×9 | 20.32 | 22.86 |
| 1×10 | 22.86 | 25.40 |
| 1×12 | 27.94 | 30.48 |
| 1×16 | 38.10 | 40.64 |
| 2×2 | 2.54 | 5.08 |
| 2×3 | 5.08 | 7.62 |
| 2×4 | 7.62 | 10.16 |
| 2×5 | 10.16 | 12.70 |
| 2×6 | 12.70 | 15.24 |
| 2×7 | 15.24 | 17.78 |
| 2×8 | 17.78 | 20.32 |
| 2×10 | 22.86 | 25.40 |
| 2×16 | 38.10 | 40.64 |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x4-Pin 10-Pack |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Miniature starter board in the form of a USB plug compatible with Arduino (1.6.5 and newer), based on the ATtiny85 microcontroller. Up to 6 GPIO lines, up to 3 PWM lines, up to 4 ADC lines, SPI or I2C interface, and LED diode
No product available!
Very small and extremely handy wireless QWERTY keyboard with built-in touchpad, for desktop computer, SMART TV, or embedded devices. It has "click" buttons, it can work at a distance of up to 3 m from the receiver. Keyboard weight: 144g. Measy RC12 Mini Wireless Keyboard
No product available!
The AltIMU version 3 module includes sensors L3GD20H, LSM303D and LPS331AP. The I2C communication interface with access to 10 measured values allows to determine the height and position of the module. The board is supplied with voltage in the range of 2.5..5,5 V, the connector has a pitch of 0.1 inch. Polol 2469
No product available!
GP Ultra AA alkaline battery (R6, LR06, big) 1 piece, 1.5V. Weight 17.3g
No product available!
Energizer Industrial alkaline battery (R6, LR06, large) 1 piece, 1.5V, 2700mAh capacity. Weight 23g
No product available!
HAT GSM / GPRS extension module for Raspberry Pi computers in versions 2 and +. The module is based on the SIM800 quad band SIM800. The set includes an antenna
No product available!
The module enables the replacement of a mechanical potentiometer with an electronic one, has an SPI interface and a built-in MCP4151 circuit. MOD-49
No product available!
The module enables the visual detection of the surface color, has a built-in RGB color sensor, photodiode KPS-5130. MOD-52
No product available!
The controller can control two brush motors, communicating with the master system using USB, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 15 A / channel allows you to control high-power motors. Pololu 2395
No product available!
The digital-to-analogue module (DAC) allows you to generate an analog signal, it has a built-in MCP4725 chip. MOD-53
No product available!
The ADC module allows you to measure the voltage and provide the result in digital form, it has a built-in 4-channel ADS1015 transmitter. Modally MOD-55
No product available!
The ADC module allows voltage measurement and output in digital form, it has a built-in 4-channel ADS1115 converter. MOD 56
No product available!
The DC motor driver module makes it possible to control the speed and the direction of rotation using the PWM signal, it has a built-in DRV8835 system. MOD-57
No product available!
The DC motor driver enables control of speed and direction of rotation, it has a built-in DRV8830 system. MOD 58
No product available!
ADC analog-to-digital converter module allows voltage measurement and digital output, has built-in MCP3208 chip. MOD 59
No product available!
The module enables wireless communication using Bluetooth technology in version 2.1. It has a built-in RN-42 chip with UART interface. MOD 60
No product available!