- Out-of-Stock
Pololu RP5 Expansion Plate RRC07A (Narrow) Solid Red
This expansion plate for the RP5 tracked chassis is made of 1/8" (3mm) acrylic. The numerous 3 mm wide slots give you the flexibility to mount components in a variety of orientations almost anywhere on the plate.
![]() |
| Two RP5 expansion plates with an Orangutan SV-328 and an Arduino Duemilanove. |
|---|
![]() |
| Pololu RP5 wide expansion plate with a TReX Jr. and an RC receiver. |
|---|
![]() |
| A narrow RP5 expansion plate with an Orangutan SV-328 and a Sharp digital distance sensor. |
|---|
This 1/8" acrylic expansion plate lets you mount a variety of components to your RP5 tracked chassis. The 3 mm wide slots covering the plate support many configurations of sensors and other robot components. The slot size and spacing is compatible with the many Tamiya mechanical sets that have 3 mm holes spaced 5 mm apart. Included with the plate are four tapping screws for mounting the plate to the RP5 tracked chassis.
The plate is also compatible with the Dagu Rover 5 tracked chassis, although we have noticed a misalignment between the mounting holes on the expansion plate and the Rover 5, so you might only be able to secure the plate with two screws on opposing corners.
The Pololu RP5 expansion plate comes in both narrow and wide versions. The narrow plate (RRC07A) is 6.8" x 3.1" (17.2 x 8.0 cm) and covers the main plastic housing of the RP5 chassis. The wide plate (RRC07B) is 6.8" x 5.0" (17.2 x 12.7 cm) and covers both the main plastic housing and the tracks.
Both the narrow and wide expansion plates are available in a variety of colored (and clear) acrylics:
![]() |
Pololu RP5 Expansion Plate RRC07B (Wide) Solid Red |
![]() |
Pololu Carrier with Sharp GP2Y0D810Z0F Digital Distance Sensor 10cm |
![]() |
Pololu RP5 Expansion Plate RRC07B (Wide) Solid Black |
Manufacturer
Responsible person
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED
No product available!
Module with a UART-CAN converter designed to work with the Raspberry Pi Pico. It has a built-in E810-TTL-CAN01 transceiver and enables data transmission between a system with UART interface and a device with CAN. Waveshare Pico-CAN-A
No product available!
Monochrome OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. It has a built-in SH1106 controller, communication via the SPI interface. Pololu 3760
No product available!
The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828
No product available!
Module with E-Ink (e-Paper) display with a diagonal of 2.9"and a resolution of 296x128 px with WiFi communication. Adafruit 4800
No product available!
Module with a digital barometer DPS310. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C or SPI. Adafruit 4494
No product available!
Module with a 6-axis IMU sensor (accelerometer and gyroscope) that allows you to measure acceleration and rotational speed in a wide range of ±30g and ±4000dps. Communicates via I2C. Adafruit 4464
No product available!
Module with WM8960 audio decoder that allows you to operate 1 W stereo speakers and two microphones via the I2S interface. Adafruit 4757
No product available!
Module with WiFi Espressif ESP32-S2. It integrates two 3.3 V stabilizers, SPI Flash memory, LiPo charging circuit, light sensor and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4769
No product available!
Wireless temperature and humidity sensor. It allows you to track changes in temperature and humidity in your home. Shelly H&T BLACK
No product available!
Pololu RP5 Expansion Plate RRC07A (Narrow) Solid Red