- Out-of-Stock
MAX31723PMB1
ID: 198667
Maxim Temperature Sensor/Switch - Peripheral Module
MAX31723PMB1 Peripheral Module
Refer to the MAX31723 IC data sheet for detailed information regarding operation of the IC.
Description
The MAX31723PMB1 peripheral module provides the necessary hardware to interface the MAX31723 digital thermometer and thermostat to any system that utilizes PmodK-compatible expansion ports configurable for SPI and/or GPIO communication. The IC provides temperature-to-digital conversion with no additional components. Temperature readings are communicated from the device over an SPI interface or a 3-wire serial interface. The choice of interface is selectable by the user. For applications that require greater temperature resolution, the user can adjust the readout resolution from 9 bits to 12 bits. This is particularly useful in applications where thermal runaway conditions must be detected quickly. The thermostat has a dedicated open-drain output (TOUT). Two thermostat operating modes (comparator and interrupt) control thermostat operation based on user-defined nonvolatile trip points (THIGH and TLOW).Refer to the MAX31723 IC data sheet for detailed information regarding operation of the IC.
Features
- Measures Temperatures from -55NC to +125NC
- Thermometer Accuracy is Q0.5NC
- Thermometer Resolution is Configurable from 9 Bits to 12 Bits
- Thermostat Output with User-Defined Nonvolatile Thresholds
- SPI or 3-Wire Interface Selectable through Jumpers
- 6-Pin Pmod-Compatible Connector (SPI/GPIO)
- Example Software Written in C for Portability
- RoHS Compliant
- Proven PCB Layout
- Fully Assembled and Tested
198667
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Digital Thermometers and Thermostats with SPI/3-Wire Interface, MSOP8, Maxim, RoHS
zł32.71
24h
Available quantity: 1
Available
Other products in the same category (16)
The eXtremestyle silicone cable (1.5m length) with Lightning connector. Allows you to charge the device and transfer data. eXtreme S15ULW
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with US Type C connector. Allows you to charge the device and transfer data. eXtreme S15UCB
Retired
No product available!
The eXtremestyle silicone cable (1.5m length) with US Type C connector. Allows you to charge the device and transfer data. eXtreme S15UCW
Retired
No product available!
The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMB
Retired
No product available!
The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMW
Retired
No product available!
Board with ATmega32U4 and Atheros AR9331. It combines the advantages of a microcontroller and a microprocessor with Linux. The set has 32 KB flash memory, 20 digital inputs / outputs, including the ability to configure 7 as PWM channels and 12 as analog inputs (ATmega32U4) as well as a WiFi module and a microSD card slot (Atheros AR9331). Arduino Yún Rev2
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATA8520 SigFox module enabling the implementation of SigFox communication. Arduino MKR FOX 1200 ABX00014
Retired
No product available!
Board is a board with Atmel ATSAMW25 chip, the system has SAMD21 microcontroller (ARM, Cortex-M0+ core, 256 kB Flash, 8 KB SRAM) treated with 48 MHz clock. The ATSAMW25 chip also includes the WINC1500 Wi-Fi module. The user has at his disposal: 8 I/O lines, 12 PWM channels, 7 analog inputs. Arduino MKR1000 ABX00004
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the CMWX1ZZABZ module enabling the implementation of communication in Lo-Ra networks. Arduino MKR WAN1300 ABX00017
Retired
No product available!
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018
Retired
No product available!
Intelligent Wi-Fi plug. It automatically controls lighting, heating and any other connected electrical appliance. Shelly Plug S
Retired
No product available!
LED lighting controller with WiFi function. It allows you to control RGB, RGBW and single-color LED strips. Supports lighting powered by 12V and 24V. Shelly RGBW2
Retired
No product available!
Double relay controlled by Wi-Fi with the function of roller shutter controller. It allows you to control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, radiators, air conditioners). Shelly 2.5
Retired
No product available!
USB WiFi adapter for Odroid minicomputers. It has a built-in 2.4GHz and 5.8GHz Dual band antenna. Compatible with Android and Linux systems. Odroid Wifi Module 5A
Retired
No product available!
Extensive signal analysis kit including the Analog Discovery 2 adapter, Analog Discovery BNC adapter, breadboards, BNC probes, cables with Minigrabber connectors and crocodile clips and necessary accessories. Digilent Ultimate Analog Discovery 2 Bundle (471-027)
Retired
No product available!
Board with nRF52840 microcontroller with Cortex M4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 and IMU LSM9DS1 module. Arduino ABX00030
Retired
No product available!
Maxim Temperature Sensor/Switch - Peripheral Module