- Out-of-Stock
DEV-10116 - Arduino Fio
Description:
The Arduino Funnel I/O (Fio) is a board designed by Shigeru Kobayashi, based on the original design from LilyPad.
Funnel is a toolkit to sketch your idea physically, and consists of software libraries and hardware. By using Funnel, the user can interface to sensors and/or actuators with various programming languages such as ActionScript 3, Processing, and Ruby.
Arduino Fio is compatible with Funnel. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board. The Fio has been designed to be wirelessly reprogrammable. Checkout tutorial on wireless bootloading!
Note: The miniUSB connector is used for battery charging only. To bootload new firmware, you will need an external serial connection over an FTDI Basic, FTDI cable, or other serial connection. Check the related products below.
Note: The XBee socket and FTDI connection live on the same TX/RX pins of the ATmega328. You will need to remove the XBee module while reprogramming over serial. We recommend using a wireless bootloader whenever possible to avoid this step.
Note: A portion of this sale is given back to Arduino LLC to help fund continued development of new tools and new IDE features.
Features:
,hr>
Documents:
Replaces:DEV-09712
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a D24 tip
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a B2 tip
No product available!
Module with 4 LED displays (three LEDs in red, yellow and green) dedicated to the Raspberry Pi. Perfect for use as a traffic light. SB Components 06977
No product available!
6-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 21802
No product available!
4-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 06670
No product available!
The PCA9685 servo driver module is dedicated to Raspberry Pi minicomputers. It allows you to control 16 PWM channels. SB Components 08957
No product available!
2-channel module with relays, designed to work with the Raspberry Pi. It can switch 250VAC/7A or 30VDC/10A signals. SB Components 14088
No product available!
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
No product available!
The PMSA003 air quality sensor module is designed for the Raspberry Pi. It allows you to analyze the amount of pollutants based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 20768
No product available!
The PCA9685 servo driver module is dedicated to micro: bit educational boards. It allows you to control 16 PWM channels. SB Components 09183
No product available!
The module with 4 relays, designed to work with the micro:bit. It allows you to control devices with operating parameters up to 120VAC/2A or 24VDC/2A. SB Components 14118
No product available!
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
No product available!
Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669
No product available!
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC converter and measures the pressure between the two inlets up to 10 kPa. SB Components 20638
No product available!
USB-UART/I2C converter based on the MCP2221 chip. It enables communication of devices with UART or I2C interface with a computer. SB Components 21246
No product available!
The Murata LQM18DH6R8M70L is a high-quality 6.8 µH inductor supporting up to 330 mA current, ideal for compact applications such as DC/DC power supplies and mobile devices. It features low series resistance (ESR) and excellent stability for efficient operation, and its SMD 0603 package allows easy integration into modern electronics designs.
No product available!
DEV-10116 - Arduino Fio