- Out-of-Stock
Turnigy nano-tech 2200mah 3S 45~90C Lipo Pack (11951)
Suited to the following models:
ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S
* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries.
Power density reaches 7.5 kw/kg.
Less Voltage sag during high rate discharge, giving more power under load.
Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
Greater thermal control, pack usually doesnt exceed 60degC
Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
Higher capacity during heavy discharge. More than 90% at 100% C rate.
Fast charge capable, up to 15C on some batteries.
Longer Cycle Life, almost double that of standard lipoly technology.
PRODUCT ID: N2200.3S.45
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
No product available!
No product available!
No product available!
Module with a temperature sensor designed for the M5Stack sets. It allows you to measure high temperatures. The set includes a K-type thermocouple probe. M5Stack U133
No product available!
No product available!
No product available!
DIGITAL MAGNETOPHONE WITH ISD17180 SYSTEM - A KIT FOR INDEPENDENT INSTALLATION
No product available!
Flat USB cable A - micro-B USB with a length of 1m, cable in green
No product available!
No product available!
No product available!
The fan designed for use with the Digilent ZYBO Z7-20 plate mounted on the heat sink allows better air flow, which results in lowering the FPGA temperature. The fan has a 3-pin connector, the supply voltage is 5 V. In addition to the fan, there are screws for fixing. Digilent 240-130
No product available!
Needle bending needle, for precise glue application, Flux 1,194mm internal diameter and 1,651mm outside diameter
No product available!
No product available!
No product available!
No product available!
HK Turnigy nano-tech 2200mah 3S 45~90C Lipo Pack (11951)