- Out-of-Stock
AVT733 B
ID: 46193
MONITOR AND CONSERVATOR BATTERY - SELF-ASSEMBLY KIT
MONITOR AND CONSERVATOR BATTERY - SELF-ASSEMBLY KIT
Producer: AVT
Lead-acid batteries are particularly sensitive to complete discharge (eg during storage) - as a rule, it means irreversible deterioration of their properties, including loss of capacity. To avoid this state of affairs, the AVT733 kit should be used. The device has a double role. During normal operation, it checks the battery voltage from time to time (about a minute) and signals its correct level. Lowering the voltage below the set limit causes the activation of sound signaling. The second function of the system is to preserve the battery with short current pulses. An additional button allows you to check the status of the 'ward' at any time.
The device is especially recommended for all users of lead-acid batteries, motorists, constructors and alarm system installers
Selected parameters:
- cooperation with lead-acid batteries (also gel ones) with a voltage of 12 V
- sound signaling of low voltage
- indication of good battery condition - LED diode
- possibility of changing the threshold voltage of signaling
- power supply - 12 V (from protected battery)
- in the set a printed circuit board, a set of elements and documentation
- Detailed description in
Download
46193
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Female terminal block, angled, 2-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-2P
Retired
No product available!
Female terminal block, angled, 3-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-3P
Retired
No product available!
Female terminal block, 2-pin. Pitch 5.0mm. Height 15mm. Suitable for 2EDGRC male strips with a pitch of 5.0 mm. 2EDGKN-5.00
Retired
No product available!
A minicomputer with a Rockchip RK3399 processor and 4GB of RAM and 32GB of eMMC memory. It features two Ethernet ports, two USB 3.0 ports, USB Type C and a microSD slot. The case includes. FriendlyELEC NanoPi R4SE
Retired
No product available!
Camera module with Sony Starvis IMX327 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a motorized IR-CUT filter. ArduCAM B0425
Retired
No product available!
Camera module with Sony Starvis IMX462 sensor that works with Raspberry Pi minicomputers. It has a 2 MP sensor and an 80° viewing angle lens, and is equipped with a movable IR-CUT filter. ArduCAM B0423
Retired
No product available!
5-channel SATA expander equipped with M.2 B Key connector. It supports HDD and SSD drives that work with the SATA protocol. Waveshare M2-SATA-5P
Retired
No product available!
2-channel M.2 SATA expander equipped with PCIe X1 connector. It supports support for SSDs that work with the SATA protocol. Waveshare PCIe-SATA-M2-2P-A
Retired
No product available!
Low cost programmer for STM32 and STM8 microcontrollers fully compatible
with the ST-Link V2
Retired
No product available!
WiFi module dedicated to Coral Dev Board Micro. It uses the Murata LBEE5HY1MW chip and connects to the base board via B2B connectors. Coral G650-07974-01
Retired
No product available!
M12 mount lens. It has a focal length of 1.3 mm and an FoV of 185°. It is designed to work with the Raspberry Pi camera. ArduCAM U6053
Retired
No product available!
Universal charger for 1-8S Li-Ion, LiPo, LiFe, LiHV, Pb and Ni-MH batteries. It has a built-in function of generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M8S
Retired
No product available!
Universal 150 W charger for 1-6S Li-Ion, LiPo, LiFe, LiHV, Pb, Ni-Cd and Ni-MH batteries. It has a built-in function of generating and measuring PWM, PPM and S.BUS signals. ToolkitRC M6 V2 Black
Retired
No product available!
AC/DC power adapter with a power of 180 W and an output voltage of 19.5 V. It is equipped with an output with an XT60 plug and is designed for universal chargers with an XT60 connector, e.g. ToolkitRC M6. ToolkitRC ADP180
Retired
No product available!
An electric precision screwdriver with the option of manual or automatic operation. The screwdriver is equipped with an OLED display and a built-in rechargeable battery that provides up to 6 hours of use. MiniWare ES15
Retired
No product available!
Color LEDs 4 mm, which is a solution between "ordinary" LEDs and fully addressable LEDs. The user cannot address every LED in the chain, but can change the color and mode of all LEDs in the chain. SparkFun COM-21209
Retired
No product available!
MONITOR AND CONSERVATOR BATTERY - SELF-ASSEMBLY KIT